Bare Act Search Results

Calcutta Slum Clearance and Rehabilitation of Slumdwellers Act, 1958 Complete Act

State: West Bengal

Year: 1958

....."Calcutta" means the area described in Schedule I to the Calcutta Municipal Act, 1951, as deemed to have been amended under section 594 of that Act. Section 2 Repeal and prohibition of erection or addition or alteration of new hut, etc In any area to which this Act applies (a) sections 393 to 413 (both inclusive) of, and Parts VIII and IX of Schedule XVI to, the Calcutta Municipal Act, 1951, and sections 335 to 362 (both inclusive) of, and Parts VIII and IX of Schedule XVII to, the Calcutta Municipal Act, 1923, as extended to the Municipality of Howrah by notification No. 260M, dated the 18th January, 1932, by the Government of Bengal in the Ministry of Local Self-Government and sections 334 to 347 (both inclusive) of, and Sections E, F and G and Form B of Schedule VI to, the Bengal Municipal Act, 1932, as the case may be, shall stand repealed, and (b) notwithstanding anything contained in any of the aforesaid Acts, no new hut or collection of huts shall be erected or no addition to, or alteration in, any such hut or collection of huts, shall be made in such area except with the permission in writing of the prescribed authority and subject to such restrictions or.....

Government of Punjab Department of Finance(the Punjab Civil Services Rules) Complete Act

State: Punjab

Year: 1984

.....in the case of services and posts in connection with the affairs of the Union and of the State respectively, it was not considered necessary to enact the Act, referred to above. 2. In exercise of the powers conferred by the proviso to Article 309 of the Constitution of India, the Governor of the Punjab issued the rules as contained in the First Edition and reprint thereof. Since the issue of the First Edition (reprint)m there have been several changes in the Leave Rules any Pay Fixation Rules, and enhanced powers have been delegated to the various authorities during 1962. The present edition incorporates correction slips Nos.1 to 222, amendments Nos. 1 to 30 of 1962 and 1 to 26 of 1963 to the First Edition (reprint), and thus brings the compilation up-to-date. 3. From Ist November 1956, the erstwhile State of Pepsu and Punjab have been integrated into the new State called Punjab. Under proviso to Section 115 (7) of the States Re-organisation Act, 1956, no rule can be amended or made, which would adversely affect the conditions of service of the employees of the erstwhile States of Punjab and Pepsu, except with the specific approval of the Government of India. Accordingly,.....

The Rajasthan Value Added Tax Act, 2003 Complete Act

State: Rajasthan

Year: 2003

.....or horticultural produce, grown by himself or grown on any land in which he has an interest as owner or tenant as defined in the Rajasthan Tenancy Act, 1955 (Act No. 3 of 1955), shall not be deemed to be a dealer in respect of such sales within the meaning of this clause; (12)"Deputy Commissioner (Administration)", "Assistant Commissioner", "Commercial Taxes Officer", "Assistant Commercial Taxes Officer" or "Junior Commercial Taxes Officer" means the person holding office with that designation under the State Government; (13) "exempted goods" means any goods exempted from tax in accordance with the provisions of this Act; (14)"firm", "partner" and "partnership" shall have the meanings respectively assigned to them in the Indian Partnership Act, 1932 (Central Act No. 9 of 1932); (15) "goods" means all kinds of movable property, whether tangible or intangible, other than newspapers, money, actionable claims, stocks, shares and securities, and includes materials, articles and commodities used in any form in the execution of works contract, livestock and all other things attached to or forming part of the land which is agreed to be severed before sale or under the contract.....

Central Excise Tariff Act, 1985 Chapter 72

Title: Iron and Steel

State: Central

Year: 1985

.....or other deformations produced during the rolling process (reinforcing bars and rods); - be twisted after rolling. (n) Angles, shapes and sections: Products having a uniform solid cross-section along their whole length which do not conform to any of the definitions at (ij), (k), (l) or (m) above or to the definition of wire. Chapter 72 does not include products of heading 7301 or 7302. (o) Wire: Cold-formed products in coils, of any uniform solid cross-section along their whole length, which do not conform to the definition of fiat-rolled products. (p) Hollow drill bars and rods: Hollow bars and rods of any cross-section, suitable for drills, of which the greatest external dimension of the cross-section exceeds 15 mm but does not exceed 52 mm, and of which the greatest internal dimension does not exceed one half of the greatest external dimension. Hollow bars and rods of iron or steel not conforming to this definition are to be classified in heading 7304. 2. Ferrous metals clad with another ferrous metal are to be classified as products of the ferrous metal predominating by weight. 3. Iron or steel products obtained by electrolytic deposition, by.....

Central Excise Tariff (Amendment) Act, 2004 Chapter LXXII

Title: Iron and Steel

State: Central

Year: 2004

.....II Application for permission to avail of the special procedure relating to stainless steel patties or pattas or aluminium circles. Name of the factory/factories...................Address............................. I/We.....................manufacturers of stainless steel patties or pattas/ aluminium circles, residing at..............taluk/tehsil...........district........and holders of Central Excise Registration No.....................dated .........................hereby apply to avail myself/ourselves during the.............calendar month/the period beginning with.........20..........and ending with...........20.............of the special procedure in respect of the production or transactions in such stainless steel patties or pattas or aluminium circles at my/our above mentioned factory/factories. 2. I/We hereby agree to abide by the terms and conditions of the said procedure throughout the said period. Place: Date: Signature of manufacturers or his/their authorized agent(s). Countersigned Superintendent of Central Excise........................ Range.......... Circle........... Place: Date: Permission granted for Calendar month........./the.....

Customs Tariff Act 1975 Chapter 72

Title: Iron and Steel

State: Central

Year: 1975

.....to be classified as an alloy of the metal which predominates by weight over each of the other metals; (b) An alloy composed of base metals of this Section and of elements not falling within this Section is to be treated as an alloy of base metals of this Section if the total weight of such metals equals or exceeds the total weight of the other elements present; (c) In this Section the term "alloys" includes sintered mixtures of metal powders, heterogeneous intimate mixtures obtained by melting (other than cermets) and intermetallic compounds. 6. Unless the context otherwise requires, any reference in this Schedule to a base metal includes a reference to alloys which, by virtue of Note 5 above, are to be classified as alloys of that metal. 7. Classification of composite articles: Except where the headings other wise require, articles of base metal (including articles of mixed materials treated as articles of base metal under the Interpretative Rules) containing two or more base metals are to be treated as articles of the base metal predominating by weight over each of the other metals. For this purpose: (a) Iron and steel, or different kinds of iron or steel, are.....

Customs Tariff (Amendment) Act, 2003 Chapter LXXII

Title: Iron and Steel

State: Central

Year: 2003

.....or other deformations produced during the rolling process (reinforcing bars and rods); - be twisted after rolling. (n) Angles, shapes and sections: Products having a uniform solid cross-section along their whole length which do not conform to any of the definitions at (ij), (k), (l) or (m) above or to the definition of wire. Chapter 72 does not include products of heading 7301 or 7302. (o) Wire: Cold-formed products in coils, of any uniform solid cross-section along their whole length, which do not conform to the definition of flat-rolled products. (p) Hollow drill bars and rods: Hollow bars and rods of any cross-section, suitable for drills, of which the greatest external dimension of the cross-section exceeds 15 mm but does not exceed 52 mm, and of which the greatest internal dimension does not exceed one half of the greatest external dimension. Hollow bars and rods of iron or steel not conforming to this definition are to be classified in heading 7304. 2. Ferrous metals clad with another ferrous metal are to be classified as products of the ferrous metal predominating by weight. 3. Iron or steel products obtained by electrolytic deposition, by.....

Industrial Disputes Act, 1947 Schedule I

Title: The First Schedule

State: Central

Year: 1947

.....of Rs. 10 crore and above.--Rajasthan Gaz., 31-3-1995, Pt. 5 'Gha' Ext., p. 59. Tamil Nadu 11. Leather. 12. Oxygen and Acetylene.--Tamil Nadu Act 9 of 1963, section 3 (24-5-1963). Rayon Nylon and other Synthetic Fibre Industry.--Tamil Nadu Govt. Gaz., 13-5-1970, Pt. II, sec. 1, p. 809. Heavy Chemicals Industry.--Tamil Nadu Govt. Gaz., 9-9-1970, Pt. II, sec. 2, p. 1440. Surgical and Pharmaceutical Industry.--Tamil Nadu Govt. Gaz., 23-3-1980, Pt. II, sec. 2, p. 198. Electric Goods Manufactory.--Tamil Nadu Govt. Gaz., 13-4-1983, Pt. II, sec. 2, p. 301. Madras Export Processing Zone.--Tamil Nadu Govt. Gaz., 13-11-1985, Pt. II, sec. 2, p. 860 (No. 44). Manufacture of Boiler Auxiliaries for High Pressure Boilers.--Tamil Nadu Govt. Gaz., 29-10-1986, Pt. II, sec. 2, p. 760 (No. 42). Any Banking Service in the Co-operative Sector.--Tamil Nadu Govt. Gaz., 24-6-1992, Pt. II, sec. 2, p. 334 (No. 25). Service in National Airports Authority.--Tamil Nadu Govt. Gaz., 10-7-1991, Pt. II, sec. 2, p. 473 (No. 26). All Industrial Gases other than Oxygen and Acetylene Manufacturing Industry.--Tamil Nadu Govt. Gaz., 28-10-1992, Pt. II, sec. 2, p. 612 (No. 25). Industrial.....

Central Excise Tariff Act, 1985 Chapter 38

Title: Miscellaneous Chemical Products

State: Central

Year: 1985

.....26 (heading 2620); (d) medicaments (Heading 3003 or 3004); (e) spent catalysts of a kind used for the extraction of base metals or for the manufacture of chemical compounds of base metals (heading 2620), spent catalysts of a kind used principally for the recovery of precious metal (heading 7112) or catalysts consisting of metals or metal alloys in the form of, for example, finely divided powder or woven gauze (Section XIV or XV). 2. (A) For the purpose of heading 3822, the expression "certified reference materials" means reference materials which are accompanied by a certificate which indicates the values of the certified properties, the methods used to determine these values and the degree of certainty associated with each value and which are suitable for analytical, calibrating or referencing purposes. (B) With the exception of the products of Chapter 28 or 29, for the classification of certified reference materials, heading 3822 shall take precedence over any other heading in the Schedule. 3. Heading 3824 includes the following goods which are not to be classified in any other heading of this Schedule: (a) cultured crystals (other than optical elements) weighing.....

Central Excise Tariff (Amendment) Act, 2004 Chapter XXXVIII

Title: Miscellaneous Chemical Products

State: Central

Year: 2004

.....26 (heading 2620); (d) medicaments (Heading 3003 or 3004); (e) spent catalysts of a kind used for the extraction of base metals or for the manufacture of chemical compounds of base metals (heading 2620), spent catalysts of a kind used principally for the recovery of precious metal (heading 7112) or catalysts consisting of metals or metal alloys in the form of, for example, finely divided powder or woven gauze (Section XIV or XV). 2. (A) For the purpose of heading 3822, the expression "certified reference materials" means reference materials which are accompanied by a certificate which indicates the values of the certified properties, the methods used to determine these values and the degree of certainty associated with each value and which are suitable for analytical, calibrating or referencing purposes. (B) With the exception of the products of Chapter 28 or 29, for the classification of certified reference materials, heading 3822 shall take precedence over any other heading in the Schedule. 3. Heading 3824 includes the following goods which are not to be classified in any other heading of this Schedule: (a) cultured crystals (other than optical elements) weighing.....