CHAPTER 72 IRON AND STEEL NOTES
1. In this Chapter and, in the case of Notes (d), (e) and (f) throughout this Schedule, the following expressions have the meanings hereby assigned to them:
(a) Pig Iron:
Iron-carbon alloys not usefully malleable, containing more than 2% by weight of carbon and which may contain by weight one or more other elements within the following limits:
-not more than 10% of chromium
- not more than 6% of manganese
- not more than 3% of phosphorus
- not more than 8% of silicon
- a total of not more than 10% of other elements.
(b) Spiegeleisen:
Iron-carbon alloys containing by weight more than 6% but not more than 30% of manganese and otherwise conforming to the specification at (a) above.
(c) Ferro-alloys:
Alloys in pigs, blocks, lumps or similar primary forms, in forms obtained by continuous casting and also in granular or powder forms, whether or not agglomerated, commonly used as an additive in the manufacture of other alloys or as de-oxidants, de-sulphurising agents or for similar uses in ferrous metallurgy and generally not usefully malleable, containing by weight 4% or more of the element iron and one or more of the following:
- more than 10% of chromium
- more than 30% of manganese
- more than 3% of phosphorus
- more than 8% of silicon
- a total of more man 10% of other elements, excluding carbon, subject to a maximum content of 10% in the case of copper.
(d) Steel:
Ferrous materials other than those of heading 7203 which (with the exception of certain types produced in the form of castings) are usefully malleable and which contain by weight 2% or less of carbon. However, chromium steels may contain higher proportions of carbon.
(e) Stainless steel:
Alloy steels containing, by weight, 1.2% or less of carbon and 10.5% or more of chromium, with or without other elements.
(f) Other alloy steel:
Steels not complying with the definition of stainless steel and containing by weight one or more of the following elements in the proportion shown:
- 0.3% or more of aluminium
- 0.0008% or more of boron
- 0.3% or more of chromium
- 0.3% or more of cobalt
- 0.4% or more of copper
- 0.4% or more of lead
- 1.65% or more of manganese
- 0.08% or more of molybdenum
- 0.3% or more of nickel
- 0.06% or more of niobium
- 0.6%ormoreofsilicon
- 0.05% or more of titanium
- 0.3% or more of tungsten (wolfram)
- 0.1% or more of vanadium
- 0.05% or more of zirconium
- 0.1% or more of other elements (except sulphur, phosphorus, carbon and nitrogen), taken separately.
(g) Remelting scrap ingots of iron and steel:
Products roughly cast in the form of ingots without feeder-heads or hot tops, or of pigs, having obvious surface faults and not complying with the chemical composition of pig iron, spiegeleisen or ferro-alloys.
(h) Granules:
Products of which less than 90% by weight passes through a sieve with a mesh aperture of 1 mm and of which 90% or more by weight passes through a sieve with a mesh aperture of 5 mm.
(ij) Semi-finished products:
Continuous cast products of solid section, whether or not subjected to primary hot-rolling; and other products of solid sections, which have not been further worked than subjected to primary hot-rolling or roughly shaped by forging, including blanks for angles, shapes or sections.
These products are not presented in coils.
(k) Flat-rolled products:
Rolled products of solid rectangular (other than square) cross-section, which do not conform to the definition at (if) above in the form of:
- coils of successively superimposed layers, or
- straight lengths, which if of athickness less than 4.75 mm, are of width measuring at least ten times the thickness or if of a thickness of 4.75 mm or more are of a width which exceeds 150mm and measures at least twice the thickness.
Flat-rolled products include those with patterns in relief derived directly from rolling (for example, grooves, ribs, chequers, tears, buttons and lozenges) and those, which have been perforated, corrugated or polished, provided that they do not thereby assume the character of articles or products of other headings.
Flat-rolled products of a shape other than rectangular or square, of any size, are to be classified as products of a width of 600 mm or more, provided that they do not assume the character of articles or products of other headings.
(l) Bars and rods, hot-rolled, in irregularly wound coils:
Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circles, segments of circles, ovals, rectangles (including squares), triangles, or other convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods).
(m) Other bars and rods:
Products which do not conform to any of the definitions at (ij), (A) or (l) above or to the definition of wire, which have a uniform solid cross-section along their whole length in the shape of circles, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). The products may:
- have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods);
- be twisted after rolling.
(n) Angles, shapes and sections:
Products having a uniform solid cross-section along their whole length which do not conform to any of the definitions at (ij), (k), (l) or (m) above or to the definition of wire.
Chapter 72 does not include products of heading 7301 or 7302.
(o) Wire:
Cold-formed products in coils, of any uniform solid cross-section along their whole length, which do not conform to the definition of flat-rolled products.
(p) Hollow drill bars and rods:
Hollow bars and rods of any cross-section, suitable for drills, of which the greatest external dimension of the cross-section exceeds 15 mm but does not exceed 52 mm, and of which the greatest internal dimension does not exceed one half of the greatest external dimension. Hollow bars and rods of iron or steel not conforming to this definition are to be classified in heading 7304.
2. Ferrous metals clad with another ferrous metal are to be classified as products of the ferrous metal predominating by weight.
3. Iron or steel products obtained by electrolytic deposition, by pressure casting or by sintering are to be classified, according to their form, their composition and their appearance, in the headings of this Chapter appropriate to similar hot-rolled products.
Sub-Heading Notes1. In this Chapter, the following expressions have the meanings hereby assigned to them:
(a) Alloy pig iron:
Pig iron containing, by weight, one or more of the following elements in the specified proportions:
- more than 0.2% of chromium
- more than 0.3% of copper
- more than 0.3% of nickel
- more than 0.1% of any of the following elements:
aluminium, molybdenum, titanium, tungsten (wolfram), vanadium.
(b) Non-alloy free-cutting steel:
Non-alloy steel containing, by weight, one or more of the following elements in the specified proportions:
- 0.08% or more of sulphur
- 0.1% or more of lead
- more than 0.05% of selenium
- more than 0.01 % of tellurium
- more than 0.05% of bismuth.
(c) Silicon-electrical steel:
Alloy steels containing, by weight, at least 0.6% but not more than 6% of silicon and not more than 0.08% of carbon. They may also contain by weight not more than 1% of aluminium but no other element in a proportion that would give the steel the characteristics of another alloy steel.
(d)High speed steel:
Alloy steels containing, with or without other elements, at least two of the three elements molybdenum, tungsten and vanadium with a combined content by weight of 7% or more, 0.6% or more of carbon and 3 to 6% of chromium.
(e) Silico-manganese steel:
Alloy steels containing by weight:
- not more than 0.7% of carbon
- 0.5% or more but not more than 1.9% of manganese; and
- 0.6% or more but not more than 2.3% of silicon, but no other element in a proportion that would give the steel the characteristics of another alloy steel.
2. For the classification of ferro-alloys in the sub-headings of heading 7202, the following rule should be observed:
A ferro-alloy is considered as binary and classified under the relevant subheading (if it exists) if only one of the alloy elements exceeds the minimum percentage laid down in Chapter Note 1 (c); by analogy, it is considered respectively as ternary or quaternary if two or three alloy elements exceed the minimum percentage.
For the application of this rule, the unspecified "other elements" referred to in Chapter Note 1(c) must each exceed 10% by weight.
Supplementary Notes1. Skelp means hot-rolled narrow strip of width not exceeding 600 mm with rolled (square, slightly round or bevelled) edge.
2. Ferrous metals clad with another ferrous metal are to be classified as products of the ferrous metal predominating by weight.
3. Iron or steel products obtained by electrolytic deposition, by pressure casting by sintering are to be classified, according to their form, their composition and their appearance, in the headings of this Chapter appropriate to similar hot-rolled products.
| Tariff Item | Description of goods | Unit | Rate or duty | |
| Standard | Preferential Areas | |||
| (1) | (2) | (3) | (4) | (5) |
| 1--PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWPER FORM | ||||
| 7201 | PIG IRON AND SPIEGELEISEN IN PIGS, BLOCKS OR OTHER PRIMARY FORMS | |||
| 72011000 | - Non-alloy pig iron containing by weight 0.5% or less of phosphorus | kg. | 25% | - |
| 72012000 | - Non-alloy pig iron containing by weight more than 0.5% of phosphorus | kg. | 25% | - |
| 720150 | - Alloy pig iron; spiegeleisen : | |||
| 72015010 | --- Cast iron | kg. | 25% | - |
| 72015090 | --- Other | kg. | 25% | - |
| 7202 | ferro-alloys | |||
| - Ferro-manganese : | ||||
| 72021100 | -- Containing by weight more than 2% of carbon | kg. | 25% | - |
| 72021900 | -- Other | kg. | 25% | - |
| - Ferro-silicon: | ||||
| 72022100 | -- Containing by weight more than 55% of silicon | kg. | 25% | - |
| 72022900 | -- Other | kg. | 25% | - |
| 72023000 | - Ferro-silico-manganese | kg. | 25% | - |
| - Ferro-chromium : | ||||
| 72024100 | -- Containing by weight more than 4% of carbon | kg. | 25% | - |
| 72024900 | -- Other | kg. | 25% | - |
| 72025000 | - Ferro-silico-chromium | kg. | 25% | - |
| 72026000 | - Ferro-nickel | kg. | 25% | - |
| 72027000 | - Ferro-molybdenum | kg. | 25% | - |
| 72028000 | - Ferro tungsten and ferro-silico-tungsten | kg. | 25% | - |
| - Other : | ||||
| 72029100 | -- Ferro-titanium and Ferro-silico-titanium | kg. | 25% | - |
| 72029200 | -- Ferro-vanadium | kg. | 25% | - |
| 72029300 | -- Ferro-niobium | kg. | 25% | - |
| 720299 | -- Other : | |||
| --- Ferro-phosphorus ferro-selenium, ferro-cobalt ferra-columbium, ferro-zirconium, ferro-tanlalum: | ||||
| 72029911 | ---- Ferro-phosphorus | kg. | 25% | - |
| 72029912 | ---- Ferro-selenium | kg. | 25% | - |
| 72029913 | ---- Ferro-cobalt | kg. | 25% | - |
| 72029914 | ---- Ferro-columbium | kg. | 25% | - |
| 72029915 | ---- Ferro-zirconium | kg. | 25% | - |
| 72029916 | ---- Ferro-tantalum | kg. | 25% | - |
| --- Ferro-silico-zirconium, ferro-silico-magnesium: | ||||
| 72029921 | ---- Ferro-silico-zirconium | kg. | 25% | - |
| 72029922 | ---- Ferro-silico-magnesium | kg. | 25% | - |
| --- Ferro-boron, charge-chrome : | ||||
| 72029931 | ---- Ferro-boron | kg. | 25% | - |
| 72029932 | ---- Charge-chrome | kg. | 25% | - |
| 72029990 | --- Other | kg. | 25% | - |
| 7203 | FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTION OF IRON ORE AND OTHER SPONGY FERROUS PRODUCTS, IN LUMPS, PELLETS OR SIMILAR FORMS; IRON HAVING MINIMUM PURITY BY WEIGHT OF 99.94%, IN INCUMPS, pellets OR SIMILAR FORMS | |||
| 72031000 | - Ferrous products obtained by direct reduction of iron ore | kg. | 40% | - |
| 72039000 | - Other | kg. | 40% | - |
| 7204 | ferrous waste and scrap; remelttng scrap ingotsOF IRON OR STEEL | |||
| 72041000 | - Waste and scrap of cast iron | kg. | 40% | - |
| - Waste and scrap of alloy steel : | ||||
| 7204 21 | -- Of stainless steel : | |||
| 7204.2110 | --- Empty or discharged cartridges of all bores and sizes | kg. | 40% | - |
| 72042190 | --- Other | kg. | 40% | - |
| 720429 | - Other : | |||
| 72042910 | --- Empty or discharged cartridges of all bores and sizes | kg. | 40% | - |
| 72042920 | --- Of high speed steel | kg. | 40% | - |
| 72042990 | --- Other | kg. | 40% | - |
| 72043000 | - Waste and scrap of tinned iron or steel | Kg. | 40% | - |
| - Other waste and scrap : | ||||
| 72044100 | -- Turnings, shavings, chips, milling wAste, saw dust, fillings, trimmings and stampings, whether or not in bundles | kg. | 40% | |
| 72044900 | -- Other | kg. | 40% | - |
| 72045000 | - Remelting scrap ingots | kg. | 40% | - |
| 7205 | granules and powders, of pig won, spiegeleisen, iron or steel. | |||
| 720510 | - Granules : | |||
| --- Of iron : | ||||
| 72051011 | ---- Shot and angular grit | kg. | 40% | - |
| 72051012 | ---- Wire pellets | kg. | 40% | - |
| 72051019 | ---- Other | kg. | 40% | - |
| --- Of alloy steel : | ||||
| 72051021 | ---- Shot and angular gril | kg. | 40% | - |
| 72051022 | ---- Wire pellets | kg. | 40% | - |
| 72051029 | ---- Other | kg. | 40% | - |
| 72051090 | --- Other | kg. | 40% | - |
| - Powders : | ||||
| 72052100 | -- Of alloy steel | kg. | 40% | - |
| 720529 | -- Other : | |||
| 72052910 | --- Of iron | kg. | 40% | - |
| 72052990 | --- Other11.--- IRON AND NON-ALLOY STEEL | kg. | 40% | - |
| 7206 | IRON AND NON-ALLOY STEEL IN INGOTS OR OTHER PRIMARYforms (excluding iron op heading 7203) | |||
| 720610 | - Ingots : | |||
| 72061010 | --- Of iron | kg. | 40% | - |
| 72061020 | --- Of high carbon steel | kg. | 40% | - |
| 72061090 | --- Other | kg. | 40% | - |
| 720690 | - Other : | |||
| --- Of iron: | ||||
| 72069011 | ---- Puddled bars and pilings | kg | 40% | - |
| 72069012 | ---- Blocks, lumps and simitar forms | kg. | 40% | - |
| 72069019 | ---- Other | kg. | 40% | - |
| --- Other | ||||
| 72069091 | ---- Puddled bars and pilings | kg. | 40% | - |
| 72069092 | ---- Blocks, lumps and similar forms | kg. | 40% | - |
| 72069099 | ---- Other | kg. | 40% | - |
| 7207 | SEMl-FlNISHED PRODUCTS Of RON OR NON-ALLOY STEEL | |||
| - Containing by wight less than 0.25% of carbon | ||||
| 720711 | -- Of rectangular (including square) cross-section, the width measuring less than twice the thickness: | |||
| 72071110 | --- Electrical quality | kg | 40% | - |
| 72071120 | --- Forging quality | kg. | 40% | - |
| 72071130 | --- Seamless steel lube quality | kg. | 40% | - |
| 72071190 | --- Other | kg. | 40% | - |
| 720712 | -- Other, of rectangular (other than square) cross-section : | |||
| 72071210 | --- Electrical quality | kg. | 40% | - |
| 72071220 | --- Forging quality | kg. | 40% | - |
| 72071230 | --- Seamless steel tube quality | kg. | 40% | - |
| 72071290 | --- Other | kg. | 40% | - |
| 720719 | -- Other : | |||
| 72071910 | --- Forged blanks of non-alloy steel | kg. | 40% | - |
| 72071920 | --- Mild steel billets | kg. | 40% | - |
| 72071990 | --- Other | kg. | 40% | - |
| 720720 | - Containing by weight 0.25% or more of carbon | |||
| 72072010 | --- Forging quality | kg;. | 40% | - |
| 72072020 | --- Spring steel quality | kg. | 40% | - |
| 72072030 | --- Seamless steel tube quality | kg. | 40% | - |
| 72072090 | --- Other | kg. | 40% | - |
| 7208 | flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated | |||
| 72081000 | - In coils, not further worked than hot-rolled, with patterns in relief | kg. | 40% | - |
| - Other, in coils, not further worked than hot-rolled, pickled : | ||||
| 720825 | -- Of a thickness of 4.75 mm or more : | |||
| 72082510 | --- Plates | kg. | 40% | - |
| 72082520 | --- Universal plates | kg. | 40% | - |
| 72082530 | --- Sheets | kg. | 40% | - |
| 72082540 | --- Strip | kg. | 40% | - |
| 72082590 | --- Other | kg. | 40% | - |
| 720826 | -- Of a thickness of 3mm or more but less than 4.75mm : | |||
| 72082610 | --- Plates | kg. | 40% | - |
| 72082620 | --- Universal plates | kg. | 40% | - |
| 72082630 | --- Sheets | kg. | 40% | - |
| 72082640 | --- Strip | kg. | 40% | - |
| 72082690 | --- Other | kg. | 40% | - |
| 720827 | -- Of a thickness of less than 3mm : | |||
| 72082710 | --- Plates | kg. | 40% | - |
| 72082720 | --- Universal plates | kg. | 40% | - |
| 72082730 | --- Sheets | kg. | 40% | - |
| 72082740 | --- Strip | kg. | 40% | - |
| 72082790 | --- Other | kg. | 40% | - |
| - Other, in coils, not further worked than hot-rolled: | ||||
| 720836 | -- Of a thickness exceeding 10mm : | |||
| 72083610 | --- Plates | kg. | 40% | - |
| 72083620 | --- Universal plates | kg. | 40% | - |
| 72083630 | --- Sheets | kg. | 40% | - |
| 72083640 | --- Strip | kg. | 40% | - |
| 72083690 | --- Other | kg. | 40% | - |
| 720837 | -- Of a thickness of 4.75mm or more but not exceeding 10mm : | |||
| 72083710 | --- Plates | kg. | 40% | - |
| 72083720 | --- Universal plates | kg. | 40% | - |
| 72083730 | --- Sheets | kg. | 40% | - |
| 72083740 | --- Strip | kg. | 40% | - |
| 72083790 | --- Other | kg. | 40% | - |
| 720838 | -- Of a thickness of 3mm or more but less than4.75mm : | |||
| 72083810 | --- Plates | kg. | 40% | - |
| 72083820 | --- Universal plates | kg. | 40% | - |
| 72083830 | --- Sheets | kg. | 40% | - |
| 72083840 | --- Strip | kg. | 40% | - |
| 72083890 | --- Other | kg. | 40% | - |
| 720839 | -- Of a thickness of less than 3mm : | |||
| 72083910 | --- Plates | kg. | 40% | - |
| 72083920 | --- Universal plates | kg. | 40% | - |
| 72083930 | --- Sheets | kg. | 40% | - |
| 72083940 | --- Strip | kg. | 40% | - |
| 72083990 | --- Other | kg. | 40% | - |
| 720840 | - Not in coils, not further worked than hot-rolled, with patterns in relief : | |||
| 72084010 | --- Plates | kg. | 40% | - |
| 72084020 | --- Universal plates | kg. | 40% | - |
| 72084030 | --- Sheets | kg. | 40% | - |
| 72084040 | --- Strip | kg. | 40% | - |
| 72084090 | --- Other | kg. | 40% | - |
| - Other, not in coils, not further worked than hot-rolled : | ||||
| 720851 | -- Of a thickness exceeding 10mm : | |||
| 72085110 | --- Plates | kg. | 40% | - |
| 72085120 | --- Universal plates | kg. | 40% | - |
| 72085130 | --- Sheets | kg. | 40% | - |
| 72085140 | --- Strip | kg. | 40% | - |
| 72085190 | --- Other | kg | 40% | - |
| 720852 | -- Of a thickness of 4.75mm or more but not exceeding 10 mm : | |||
| 72085210 | --- Plates | kg. | 40% | - |
| 72085220 | --- Universal plates | kg. | 40% | - |
| 72085230 | --- Sheets | kg. | 40% | - |
| 72085240 | --- Strip | kg. | 40% | - |
| 72085290 | --- Other | kg. | 40% | - |
| 720853 | -- Of a thickness of 3 mm or more but less than 4.75mm : | |||
| 72085310 | --- Plates | kg. | 40% | - |
| 72085320 | --- Universal plates | kg. | 40% | - |
| 72085330 | --- Sheets | kg. | 40% | - |
| 72085340 | --- Strip | kg. | 40% | - |
| 72085390 | --- Other | kg. | 40% | - |
| 720854 | -- Of a thickness of less than 3mm : | |||
| 72085410 | --- Plates | kg. | 40% | - |
| 7208. 5420 | --- Universal plates | kg. | 40% | - |
| 72085430 | --- Sheets | kg. | 40% | - |
| 72085440 | --- Strip | kg. | 40% | - |
| 72085490 | --- Other | kg. | 40% | - |
| 72089000 | - Other | kg. | 40% | - |
| 7209 | flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated | |||
| - In coils, not further worked than cold-rolled (cold-reduced) : | ||||
| 720915 | -- Of a thickness of 3 mm or more : | |||
| 72091510 | --- Plates | kg. | 40% | - |
| 72091520 | --- Sheets | kg. | 40% | - |
| 72091530 | --- Strip | kg. | 40% | - |
| 72091590 | --- Other | kg. | 40% | - |
| 720916 | -- Of a thickness exceeding 1mm but less than3mm : | |||
| 72091610 | --- Plates | kg. | 40% | - |
| 72091620 | --- Sheets | kg. | 40% | - |
| 72091630 | --- Strip | kg. | 40% | - |
| 72091690 | --- Other | kg. | 40% | - |
| 720917 | -- Of a thickness of 0.5 mm or more but not exceeding 1mm : | |||
| 72091710 | --- Plates | kg. | 40% | - |
| 72091720 | --- Sheets | kg. | 40% | - |
| 72091730 | --- Strip | kg. | 40% | - |
| 72091790 | --- Other | kg. | 40% | - |
| 720918 | -- Of a thickness of less than 0.5mm : | |||
| 72091810 | --- Plates | kg. | 40% | - |
| 72091820 | --- Sheets | kg. | 40% | - |
| 72091830 | --- Strip | kg. | 40% | - |
| 72091890 | --- Other | kg. | 40% | - |
| - Not in coils not further worked than cold-rolled(cold-reduced) : | ||||
| 720925 | -- Of a thickness of 3 mm or more : | |||
| 72092510 | --- Plates | kg. | 40% | - |
| 72092520 | --- Sheets | kg. | 40% | - |
| 72092530 | --- Strip | kg. | 40% | - |
| 72092590 | --- Other | kg. | 40% | - |
| 720926 | -- Of a thickness exceeding 1mm but less than3mm : | |||
| 72092610 | --- Plates | kg. | 40% | - |
| 72092620 | --- Sheets | kg. | 40% | - |
| 72092630 | --- Strip | kg. | 40% | - |
| 72092690 | --- Other | kg. | 40% | - |
| 720927 | -- Of a thickness of 0.5 mm or more but not exceeding 1mm : | |||
| 72092710 | --- Plates | kg. | 40% | - |
| 72092720 | --- Sheets | kg. | 40% | - |
| 72092730 | --- Strip | kg. | 40% | -' |
| 72092790 | --- Other | kg. | 40% | - |
| 720928 | -- Of a thickness of less than 9.5 mm : | |||
| 72092810 | --- Plates | kg. | 40% | - |
| 72092820 | --- Sheets | kg. | 40% | - |
| 72092830 | --- Strip | kg. | 40% | - |
| 72092890 | --- Other | kg. | 40% | - |
| 72099000 | - Other | kg. | 40% | - |
| 7210 | flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated | |||
| - Plated or coated with tin : | ||||
| 721011 | -- Of a thickness of 0.5 mm or more : | |||
| 72101110 | --- OTS/MR type | kg. | 40% | - |
| 72101190 | --- Other | kg. | 40% | - |
| 721012 | -- Of a thickness of less than 0.5 mm: | |||
| 72101210 | --- OTS/MR type | kg. | 40% | - |
| 72101290 | --- Other | kg. | 40% | - |
| 72102000 | - Plated or coated with lead, including teme-plate | kg. | 40% | - |
| 721030 | - Electrolytically plated or coated with zinc : | |||
| 72103010 | --- Corrugated | kg. | 40% | - |
| 72103090 | --- Other | kg. | 40% | - |
| - Otherwise plated or coated with zinc : | ||||
| 72104100 | -- Corrugated | kg. | 40% | - |
| 72104900 | -- Other | kg. | 40% | - |
| 72105000 | - Plated or coated with chromium oxides or with chromium and chromium oxides | kg. | 40% | - |
| - Plated or coated -with aluminium : | ||||
| 72106100 | -- Plated or coated with aluminium-zinc alloys | kg. | 40% | - |
| 72106900 | -- Other | kg. | 40% | - |
| 72107000 | - Painted, varnished or coated with plastics | kg. | 40% | - |
| 721090 | - Other : | |||
| 72109010 | --- Lacquered | kg. | 40% | - |
| 72109090 | --- Other | kg. | 40% | - |
| 7211 | flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated orCOATED | |||
| - Not further worked than hot-rotted : | ||||
| 72111300 | -- Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief | kg. | 40% | |
| 721114 | -- Other, of a thickness of 4.75mm or more : | |||
| 72111410 | --- Flats | kg. | 40% | - |
| 72111420 | --- Universal plates | kg. | 40% | - |
| 72111430 | --- Hoops | kg. | 40% | - |
| 72111440 | --- Sheets | kg. | 40% | - |
| 72111450 | --- Strip | kg. | 40% | - |
| 72111460 | --- Skelp | kg. | 40% | - |
| 72111490 | --- Other | kg. | 40% | - |
| 721119 | -- Other : | |||
| 72111910 | --- Flats | kg. | 40% | - |
| 72111920 | --- Universal plates | kg. | 40% | - |
| 72111930 | --- Hoops | kg. | 40% | - |
| 72111940 | --- Sheets | kg. | 40% | - |
| 72111950 | --- Strip | kg. | 40% | - |
| 72111960 | --- Skelp | kg. | 40% | - |
| 72111990 | --- Other | kg. | 40% | - |
| - Not further worked than cold-rolled (cold-reduced) | ||||
| 721123 | -- Containing by weight less than 0.25% of carbon: | |||
| 72112310 | --- Flats | kg. | 40% | - |
| 72112320 | --- Universal plates | kg. | 40% | - |
| 72112330 | --- Hoops | kg. | 40% | - |
| 72112340 | --- Sheets | kg. | 40% | - |
| 72112350 | --- Strip | kg. | 40% | - |
| 72112390 | --- Other | kg. | 40% | - |
| 721129 | -- Other : | |||
| 72112910 | --- Flats | kg. | 40% | - |
| 72112920 | --- Universal plates | kg. | 40% | - |
| 72112930 | --- Hoops | kg. | 40% | - |
| 72112940 | --- Sheets | kg. | 40% | - |
| 72112950 | --- Strip | kg. | 40% | - |
| 72112960 | --- Skelp | kg. | 40% | - |
| 72112990 | --- Other | kg. | 40% | - |
| 721190 | - Other : | |||
| --- Universal plates : | ||||
| 72119011 | ---- Of boiler quality | kg. | 40% | - |
| 72119012 | ---- Of high tensile quality | kg. | 40% | - |
| 72119013 | ---- Of ship building quality | kg. | 40% | - |
| 72119090 | --- Other | kg. | 40% | - |
| 7212 | flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated | |||
| 721210 | - Plated or coated with tin : | |||
| 72121010 | --- OTS or MR type | kg. | 40% | - |
| 72J21090 | --- Other | kg. | 40% | - |
| 721220 | - Electrolylically plated or coated with zinc : | |||
| 72122010 | --- Corrugated | kg. | 40% | - |
| 72122090 | --- Other | kg. | 40% | - |
| 721230 | - Otherwise plated or coated with zinc : | |||
| 72123010 | --- Corrugated | kg. | 40% | - |
| 72123090 | --- Other | kg. | 40% | - |
| 72124000 | - Painted, varnished or coated with plastics | kg. | 40% | - |
| 721250 | Otherwise plated or coaled : | |||
| 72125010 | --- Plated or coated with lead | kg. | 40% | - |
| 72125020 | --- Lacquered | kg. | 40% | - |
| 72125090 | --- Other | kg. | 40% | - |
| 72126000 | - Clad | kg. | 40% | - |
| 7213 | BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF IRON OK NON-ALLOY STEEL | |||
| 721310 | - Containing indentations, ribs, grooves or other deformations produced during the rolling process | |||
| 72131010 | --- Of free cutting steel | kg. | 40% | - |
| 72131090 | --- Other | kg. | 40% | - |
| 721320 | - Other, of free-Cutting steel : | |||
| 72132010 | --- Electrode quality | kg. | 40% | - |
| 72132020 | --- Cold heading quality | kg. | 40% | - |
| 72132090 | --- Other | kg. | 40% | - |
| - Other | ||||
| 721391 | -- Of circular cross-section measuring less than 14mm in diameter : | |||
| 72139110 | --- Electrode quality | kg. | 40% | - |
| 72139120 | --- Cold heading quality | kg. | 40% | - |
| 72139190 | --- Other | kg. | 40% | - |
| 721399 | -- Other : | |||
| 72139910 | --- Electrode quality | kg. | 40% | - |
| 72139920 | --- Cold heading quality | kg. | 40% | - |
| 72139990 | --- Other | kg. | 40% | - |
| 7214 | other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted afterROLLING | |||
| 721410 | Forged : | |||
| 72141010 | --- Spring steel quality | kg. | 40% | - |
| 72141090 | --- Other | kg. | 40% | - |
| 721420 | - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling : | |||
| 72142010 | --- Spring steel quality | kg. | 40% | - |
| 72142090 | --- Other | kg. | 40% | - |
| 72143000 | - Other, of free cutting steel | kg. | 40% | - |
| - Other : | ||||
| 721491 | -- Of rectangular (other than square) cross-section : | |||
| 72149110 | --- Mild steel bright bar | kg. | 40% | - |
| 72149190 | --- Other | kg. | 40% | - |
| 721499 | -- Other : | |||
| 72149910 | --- Of spring steel quality | kg. | 40% | - |
| 72149990 | --- Other | kg. | 40% | - |
| 7215 | other bars and rods of iron or non-alloy steel | |||
| 72151000 | - Of free-cutting steel, not further worked than cold-formed or cold-finished | kg. | 40% | - |
| 721550 | Other, not further worked than cold-formed orcold-finished : | |||
| 72155010 | --- Mild steel bright bar | kg. | 40% | - |
| 72155090 | --- Other | kg. | 40% | - |
| 721590 | - Other : | |||
| 72159010 | --- Plated or coated with zinc | kg. | 40% | - |
| 72159020 | --- Plated or coated with other base, metals | kg. | 40% | - |
| 72159090 | --- Other | kg. | 40% | - |
| 7216 | angles, shapes and sectioNS of iron or non-alloySTEEL | |||
| 72161000 | - U. I or II sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm | kg. | 40% | |
| - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80mm : | ||||
| 72162100 | -- L sections | kg. | 40% | - |
| 72162200 | -- T sections | kg. | 40% | - |
| U I or H sections, not further worked than hot-rolled, hot-drawn or extruded of a height of 80 mm or more : | ||||
| 72163100 | -- U sections | kg. | 40% | - |
| 72163200 | -- I sections | kg. | 40% | - |
| 72163300 | -- II sections | kg. | 40% | - |
| 72164000 | - 1, or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more | kg. | 40% | |
| 72165000 | - Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded | kg. | 40% | - |
| - Angles, shapes and sections, not farther worked than cold-farmed or cold-finished : | ||||
| 72166100 | -- Obtained from flat-rolled products | kg. | 40% | - |
| 72166900 | -- Other | kg. | 40% | - |
| - Other: | ||||
| 72169100 | -- Cold-formed or cold-finished from flat rolled products | kg. | 40% | - |
| 721699 | -- Other | |||
| 72169910 | --- Plated or coated with zinc | kg. | 40% | - |
| 72169920 | --- Plated or coated with base metals other than zinc | kg. | 40% | - |
| 72169930 | --- Slotted angles and slotted channels | kg. | 40% | - |
| 72169940 | --- Forged | kg. | 40% | - |
| 72169990 | --- Other | kg. | 40% | - |
| 7217 | WIRE OF IRON OR NON-ALLOY STEEL | |||
| 721710 | - Not plated or coated, whether or not polished : | |||
| 72171010 | --- Of a thickness of 18 SWG and below | kg. | 40% | - |
| 72171020 | --- Of a thickness above 18 SWG but up to 26 SWC | kg. | 40% | - |
| 72171030 | --- Of a thickness above 26 SWG | kg. | 40% | - |
| 721720 | - Plated or coated with zinc : | |||
| 72172010 | --- Of a thickness of 18 SWG and below | kg. | 40% | - |
| 72172020 | --- Of a thickness above 18 SWG but up to 26 SWG | kg. | 40% | - |
| 72172030 | --- Of a thickness above 26 SWG | kg. | 40% | - |
| 721730 | - Plated or coated with other base metals : | |||
| 72173010 | --- Of a thickness of 18 SWG and below | kg. | 40% | - |
| 72173020 | --- Of a thickness above 18 SWG but up to 26 SWG | kg. | 40% | - |
| 72173030 | --- Of a thickness above 26 SWG | kg. | 40% | - |
| 721790 | - Other : | |||
| --- Shaped and profiled wire : | ||||
| 72179011 | ---- Of cross section - half round | kg. | 40% | - |
| 72179012 | ---- Of cross section - flat and rectangular | kg. | 40% | - |
| 72179013 | ---- Of cross section - 'z' shaped | kg. | 40% | -. |
| 72179019 | ---- Of cross section - other shapes | kg. | 40% | - |
| --- Other : | ||||
| 72179091 | ---- High tensile quality | kg. | 40% | - |
| 72179092 | ---- Electrode quality | kg. | 40% | - |
| 72179093 | ---- Electric resistance wire (including electric resistance heating wire) | kg. | 40% | - |
| 72179099 | ---- Other III.--- STAINLESS STEEL | kg. | 40% | - |
| 7218 | stainless steel in ingots or OTHER primary forms; semi-finished products of stainless steel | ' | ||
| 72181000 | - Ingots and other primary forms | kg. | 40% | - |
| - Other : | ||||
| 72189100 | --- Of rectangular (other than square) cross-section | kg. | 40% | - |
| 721899 | -- Other : | |||
| 72189910 | --- Billets | kg. | 40% | - |
| 72189990 | --- Other | kg. | 40% | - |
| 7219 | flat-rolled products of stainless steel, of a width of 600 mm or more | |||
| - Not further worked than hot-rolled, in coils : | ||||
| 721911 | --- Of a thickness exceeding 10mm : | |||
| --- Chromium type : | ||||
| 72191111 | ---- Not exceeding 14 mm | kg. | 40% | - |
| 72191112 | ---- Exceeding 14 mm | kg. | 40% | - |
| 72191190 | --- Other | kg. | 40% | - |
| 72191200 | -- Of a thickness of 4.75 mm or more but not exceeding 10 mm | kg. | 40% | - |
| 72191300 | -- Of a thickness of 3 mm or more but lessthan 4.75 mm | kg. | 40% | |
| 72191400 | -- Of a thickness of less than 3 mm | kg. | 40% | - |
| - Not further worked than hot-rolled, not in coils : | ||||
| 721921 | -- Of a thickness exceeding 10mm : | |||
| --- Universal plates of stainless steel or heat resisting steel and chromium type : | ||||
| 72192111 | ---- Not exceeding 14 mm | kg. | 40% | - |
| 72192112 | ---- Exceeding 14 mm | kg. | 40% | - |
| --- Universal plates of stainless steel heat resisting steel, nickel chromium austenitic type: | ||||
| 72192121 | ---- Not exceeding 14 mm | kg. | 40% | - |
| 72192122 | ---- Exceeding 14 mm | kg. | 40% | - |
| --- Other chromium type : | ||||
| 72192131 | ---- Not exceeding 14 mm | kg. | 40% | - |
| 72192132 | ---- Exceeding 14 mm | kg. | 40% | - |
| --- Other nickel chromium austenitic type : | ||||
| 72192141 | ---- Not exceeding 14 mm | kg. | 40% | - |
| 72192142 | ---- Exceeding 14 mm | kg. | 40% | - |
| 72192190 | --- Other | kg. | 40% | - |
| 721922 | -- Of a thickness of 4.75mm or more but not exceeding 10mm : | |||
| --- Universal plates of stainless steel or heat resisting steel : | ||||
| 72192211 | ---- Chromium type | kg. | 40% | - |
| 72192212 | ---- Nickel chromium austenitic type | kg. | 40% | - |
| 72192219 | ---- Other | kg. | 40% | - |
| --- Other : | ||||
| 72192291 | ---- Chromium type | kg. | 40% | - |
| 72192292 | ---- Nickel chromium austenitic type | kg. | 40% | - |
| 72192299 | ---- Other | kg. | 40% | - |
| 721923 | -- Of a thickness of 3 mm or more but less than 4.75mm : | |||
| 72192310 | --- Chromium type | kg | 40% | - |
| 72192320 | --- Nickel chromium austenitic type | kg. | 40% | - |
| 72192390 | --- Other | kg. | 40% | - |
| 721924 | -- Of a thickness of less than 3mm : | |||
| --- Chromium type, of a thickness : | ||||
| 72192411 | ---- Below 0.35 mm | kg. | 40% | - |
| 72192412 | ---- 0.35 mm and above but below 0.56 mm | kg. | 40% | - |
| 72192413 | ---- 0.56 mm and above but below 0.90 mm | kg. | 40% | - |
| 72192419 | ---- Other | kg. | 40% | - |
| --- Nickel chromium austenitic type, of a thickness - | ||||
| 72192421 | ---- Below 0.35 mm | kg. | 40% | - |
| 72192422 | ---- 0.35 mm and above but below 0.56 mm | kg. | 40% | - |
| 72192423 | ---- 0.56 mm and above but below 0.90 mm | kg. | 40% | - |
| 72192429 | ---- Other | kg. | 40% | - |
| 72192490 | --- Other | kg. | 40% | - |
| - Not further worked than cold-rolled (cold reduced) : | ||||
| 721931 | -- Of a thickness of 4.75 mm or more : | |||
| --- Chromium type : | ||||
| 72193111 | ---- Not exceeding 14 mm | kg. | 40% | - |
| 72193112 | ---- Exceeding 14 mm | kg. | 40% | - |
| --- Nickel chromium austenitic type : | ||||
| 72193121 | ---- Not exceeding 14 mm | kg. | 40% | - |
| 72193122 | ---- Exceeding 14 mm | kg. | 40% | - |
| 72193190 | --- Other | kg. | 40% | - |
| 721932 | -- Of a thickness of 3 mm or more but less than 4.75mm : | |||
| 72193210 | --- Chromium type | kg. | 40% | - |
| 72193220 | --- Nickel chromium austenitic type | kg. | 40% | - |
| 72193290 | --- Other | kg. | 40% | - |
| 721933 | -- Of a thickness exceeding 1 mm but less than3mm : | |||
| 72193310 | --- Chromium type | kg. | 40% | - |
| 72193320 | --- Nickel chromium austenitic type | kg. | 40% | - |
| 72193390 | --- Other | kg. | 40% | - |
| 721934 | -- Of a thickness of 0.5 mm or more but not exceeding 1mm : | |||
| 72193410 | --- Chromium type | kg. | 40% | - |
| 72193420 | --- Nickel chromium austenitic type | kg. | 40% | - |
| 72193490 | --- Other | kg. | 40% | - |
| 721935 | -- Of a thickness of less than 0.5mm : | |||
| 72193510 | --- Chromium type | kg. | 40% | - |
| 72193520 | --- Nickel chromium austenitic type | kg. | 40% | - |
| 72193590 | --- Other | kg. | 40% | - |
| 721990 | - Other : | |||
| --- Sheets and plates : | ||||
| 72199011 | ---- Thickness more than 4.75 mm | kg. | 40% | - |
| 72199012 | ---- Thickness 3 mm to 4.75 mm | kg. | 40% | - |
| 72199013 | ---- Thickness less than 3 mm | kg. | 40% | - |
| 72199090 | --- Other | kg. | 40% | - |
| 7220 | flat-rolled products of stainless steel, of a width of less than 600 mm | |||
| - Not further worked than hot-rolled : | ||||
| 722011 | -- Of a thickness of 4.75 mm or more : | |||
| 72201110 | --- Skelp for pipes and tubes | kg. | 40% | |
| --- Strips for pipes and tubes (other than skelp) : | ||||
| 72201121 | ---- Chromium type | kg. | 40% | |
| 72201122 | ---- Nickel chromium austenitic type | kg. | 40% | . |
| 72201129 | ---- Other | kg. | 40% | - |
| 72201190 | --- Other | kg. | 40% | - |
| 722012 | -- Of a thickness of less than 4.75mm : | |||
| 72201210 | --- Skelp for pipes and tubes | kg. | 40% | - |
| --- Strips for pipes and tabes (other than skelp) : | ||||
| 72201221 | ---- Chromium type | kg. | 40% | - |
| 72201222 | ---- Nickel chromium austenitic type | kg. | 40% | - |
| 72201229 | ---- Other | kg. | 40% | - |
| 72201290 | --- Other | kg. | 40% | - |
| 722020 | - Not further worked than cold-rolled (cold-reduced) : | |||
| 72202010 | --- Skelp for pipes and tubes | kg. | 40% | - |
| --- Strips for pipes and tubes (other than skelp) : | ||||
| 72202021 | ---- Chromium type | kg. | 40% | - |
| 72202022 | ---- Nickel chromium austenitic type | kg. | 40% | - |
| 72202029 | ---- Other | kg. | 40% | - |
| 72202090 | --- Other | kg. | 40% | - |
| 722090 | - Other: | |||
| 72209010 | --- Skelp (strips for pipes and tubes) | kg. | 40% | - |
| --- Strips for pipes and tubes (other than skelp) : | ||||
| 72209021 | ---- Chromium type | kg. | 40% | - |
| 72209022 | ---- Nickel chromium austenitic type | kg. | 40% | - |
| 72209029 | ---- Other | kg. | 40% | - |
| 72209090 | --- Other | kg. | 40% | - |
| 7221 | BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF STAINLESS STEEL | |||
| 722100 | - Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel : | |||
| --- Bright bars : | ||||
| 72210011 | ---- Chromium type | kg. | 40% | - |
| 72210012 | ---- Nickel chromium austenitic type | kg. | 40% | - |
| 72210019 | ---- Other | kg. | 40% | - |
| 72210090 | --- Other | kg. | 40% | - |
| 7222 | OTHER BARS AND RODS OF STAINLESS STEEL; ANGLES,SHAPES AND SECTIONS OF STAINLESS STEEL | |||
| - Bars and rods, not farther worked than hot-rolled, hot-drawn or extruded : | ||||
| 722211 | -- Of circular cross section : | |||
| --- Bright bars : | ||||
| 72221111 | ---- Chromium type | kg. | 40% | - |
| 72221112 | --- Nickel chromium austenitic type | kg. | 40% | - |
| 72221119 | ---- Other | kg. | 40% | - |
| --- Other : | ||||
| 72221191 | ---- Chromium type | kg. | 40% | - |
| 72221192 | ---- Nickel chromium austenitic type | kg. | 40% | - |
| 72221199 | ---- Other | kg. | 40% | - |
| 722219 | -- Other : | |||
| --- Bright bars : | ||||
| 72221911 | ---- Chromium type | kg. | 40% | - |
| 72221912 | ---- Nickel chromium austenitic type | kg. | 40% | - |
| 72221919 | ---- Other | kg. | 40% | - |
| --- Other : | ||||
| 72221991 | ---- Chromium type | kg. | 40% | - |
| 72221992 | ---- Nickel chromium austenitic type | kg. | 40% | - |
| 72221999 | ---- Other | kg. | 40% | - |
| 722220 | - Bars and rods, not farther worked than cold-formed or cold-finished : | |||
| --- Bright bars : | ||||
| 72222011 | ---- Chromium type | kg. | 40% | - |
| 72222012 | ---- Nickel chromium austenitic type | kg. | 40% | - |
| 72222019 | ---- Other | kg. | 40% | - |
| -- Other : | ||||
| 72222091 | ---- Chromium type | kg. | 40% | - |
| 72222092 | ---- Nickel chromium austenitic type | kg. | 40% | - |
| 72222099 | ---- Other | kg. | 40% | - |
| 722230 | - Other bars and rods : | |||
| --- Bright bars : | ||||
| 72223011 | ---- Chromium type | kg. | 40% | - |
| 72223012 | ---- Nickel chromium austenitic type | kg. | 40% | - |
| 72223019 | ---- Other | kg. | 40% | - |
| --- Other : | ||||
| 72223091 | ---- Chromium type | kg. | 40% | - |
| 72223092 | ---- Nickel chromium austenitic type | kg. | 40% | - |
| 72223099 | ---- Other | kg. | 40% | - |
| 722240 | - Angles, shapes and sections : | |||
| 72224010 | --- Of thickness of 80 mm and above | kg. | 40% | - |
| 72224020 | --- Of below 80 mm | kg. | 40% | - |
| 7223 | WIRE OF STAINLESS STEEL | |||
| 722300 | Wire of stainless steel : | |||
| 72230010 | --- Electrode quality | kg. | 40% | - |
| --- Other : | ||||
| 72230091 | ---- Of thickness of above 1.5 mm | kg. | 40% | - |
| 72230092 | ---- of thickness of 0.46 mm and above but not exceeding 1.5 mm | kg. | 40% | - |
| 72230099 | ---- Of thickness of below 0.46 mm IV.--- OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL | kg. | 40% | |
| 7224 | OTHER ALLOY STEEL IN INGOTS OR OTHER PRIMARY FORMS; SEMI-FINISHED PRODUCTS OF OTHER ALLOY STEEL | |||
| 72241000 | - Ingots and other primary forms | kg. | 40% | - |
| 722490 | - Other : | |||
| 72249010 | --- Of tool steel quality | kg. | 40% | - |
| 72249020 | --- Of die steel quality | kg. | 40% | - |
| 72249030 | --- Of cobalt bearing high speed steel quality | kg. | 40% | - |
| 72249040 | --- Forged blanks of alloy steel | kg. | 40% | - |
| --- Other : | ||||
| 72249091 | ---- Billets | kg. | 40% | - |
| 72249099 | ---- Other | kg. | 40% | - |
| 7225 | flat-rolled products of OTHER alloy steel, of a width of 600 mm or more | |||
| - Of silicon-electrical steel: | ||||
| 72251100 | -- Grain-oriented | kg. | 40% | - |
| 72251900 | -- Other | kg. | 40% | - |
| 722520 | - Of high speed steel : | |||
| --- Hot-rolled : | ||||
| 72252011 | ---- In coils | kg. | 40% | - |
| 72252019 | ---- Not in coils | kg. | 40% | - |
| --- Cold-rolled : | ||||
| 72252021 | ---- In coils | kg. | 40% | - |
| 72252029 | ---- Not in coils | kg. | 40% | - |
| 722530 | - Other, not further worked than hot-rolled, in coils : | |||
| 72253010 | --- Of spring steel quality | kg. | 40% | - |
| 72253090 | --- Other | kg. | 40% | - |
| 722540 | - Other, not further worked than hot-rolled,not in coils : | |||
| --- Of a thickness of above 4.75mm : | ||||
| 72254011 | ---- Boiler quality | kg. | 40% | - |
| 72254012 | ---- Pressure vessel quality | kg. | 40% | - |
| 72254013 | ---- High tensile quality | kg. | 40% | - |
| 72254019 | ---- Other | kg. | 40% | - |
| 72254020 | --- Of a thickness of 3 mm and above but not exceeding 4.75 mm | kg. | 40% | - |
| 72254030 | --- Of a thickness of below 3 mm | kg. | 40% | - |
| 722550 | - Other, not farther worked than cold-rolled(cold-reduced) : | |||
| 72255010 | --- Of a thickness of less than 3 mm | kg. | 40% | - |
| 72255020 | --- Of a thickness of 3 mm to 4.75 mm | kg. | 40% | - |
| 72255030 | --- Of a thickness of above 4.75 mm | kg. | 40% | - |
| - Other: | ||||
| 72259100 | -- Electrotytically plated or coated with zinc | kg. | 40% | - |
| 72259200 | -- Otherwise plated or coated with zinc | kg. | 40% | - |
| 72259900 | -- Other | kg. | 40% | - |
| 7226 | flat-rolled products of OTHER alloy steel, of aWIDTH OF LESS THAN 600 MM | |||
| - Of silicon-electrical Steel : | ||||
| 72261100 | -- Grain-oriented | kg. | 40% | - |
| 72261900 | -- Other | kg. | 40% | - |
| 722620 | - Of high speed steel : | |||
| --- Hot-rolled : | ||||
| 72262011 | ---- In coils | kg. | 40% | - |
| 72262012 | ---- Other | kg. | 40% | - |
| --- Cold-rolled : | ||||
| 72262021 | ---- In coils | kg. | 40% | - |
| 72262022 | ---- Other | kg. | 40% | - |
| 72262030 | --- Hoops and strips | kg. | 40% | - |
| - Other: | ||||
| 722691 | -- Not further worked than hot-rolled : | |||
| 72269110 | --- Of a thickness of below 3 mm | kg. | 40% | - |
| 72269120 | --- Of a thickness of 3 mm and above but not exceeding 4.75 mm | kg. | 40% | |
| 72269130 | --- High tensile quality of a thickness of above 4.75 mm | kg. | 40% | - |
| 72269190 | --- Other | kg. | 40% | - |
| 722692 | -- Not further worked than cold-rolled (cold-reduced) : | |||
| 72269210 | --- Of a thickness of below 3 mm | kg. | 40% | - |
| 72269220 | --- Of a thickness of 3 mm and above but not exceeding 4.75 mm | kg. | 40% | - |
| 72269230 | --- Of a thickness of above 4.75 mm | kg. | 40% | - |
| 72269300 | -- Electrolytically plated or coated with zinc | kg. | 40% | - |
| 72269400 | -- Otherwise plated or coated with zinc | kg. | 40% | - |
| 722699 | -- Other : | |||
| 72269910 | --- Of a thickness of above 4.75 mm | kg. | 40% | - |
| 72269920 | --- Of a thickness of above 3 mm and but not exceeding 4.75 mm | kg. | 40% | - |
| 72269930 | --- Of a thickness of below 3 mm | kg. | 40% | - |
| 72269940 | --- Skelp (strips for pipes and tubes) | kg. | 40% | - |
| --- Hoops and strips : | ||||
| 72269951 | ---- Hot rolled | kg. | 40% | - |
| 72269952 | ---- Cold rolled | kg | 40% | - |
| 72269953 | ---- Of spring steel, other than skelp | kg. | 40% | - |
| 72269960 | --- Skelps and strips for razor blades and saw blades | kg. | 40% | - |
| 72269990 | --- Other | kg. | 40% | - |
| 7227 | BARS AND ROBS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF OTHER ALLOY STEEL | |||
| 72271000 | Of high speed steel | kg. | 40% | - |
| 72272000 | Of silico-manganese steel | kg. | 40% | - |
| 722790 | - Other : | |||
| 72279010 | --- Valve spring steelquality | kg. | 40% | - |
| 72279020 | --- Other spring steel quality | kg. | 40% | - |
| 72279030 | --- Ball bearing quality | kg. | 40% | - |
| 72279040 | --- Cold heading quality | kg. | 40% | - |
| 72279050 | --- Lead-free cutting quality | kg. | 40% | - |
| 72279060 | --- Sulphur free cutting quality | kg. | 40% | - |
| 72279090 | --- Other | kg. | 40% | - |
| 7228 | other bars and rods of OTHER alloy steel; angles, SHAPES and sections, of OTHER alloy steel; hollow DRILL bars and rods, of alloy or non- alloy steel | |||
| 722810 | - Bars and rods, of high speed steel : | |||
| 72281010 | --- Bright bars | kg. | 43% | - |
| 72281090 | --- Other | kg. | 40% | - |
| 72282000 | - Bars and rods, of silico-manganese steel | kg. | 40% | - |
| 722830 | - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded : | |||
| --- Bright bars : | ||||
| 72283011 | ---- Of alloy toot steel | kg. | 40% | - |
| 72283019 | ---- Other | kg. | 40% | - |
| --- Other : | ||||
| 72283021 | ---- Lead bearing steel | kg. | 40% | - |
| 72283022 | ---- Spring steel | kg. | 40% | - |
| 72283023 | ---- Sulphur bearing steel | kg. | 40% | - |
| 72283024 | ---- Tool and die steel | kg. | 40% | - |
| 72283029 | ---- Other | kg. | 40% | - |
| 72284000 | - Other bars and rods, not further worked than forged | kg. | 40% | - |
| 722850 | - Other bars and rods, notjiirther worked than cold-formed or cold-finished : | |||
| 72285010 | --- Of engine valves and cold heading steel | kg. | 40% | - |
| 72285090 | --- Other | kg. | 40% | - |
| 722860 | - Other bars end rods : | |||
| --- Bright ban : | ||||
| 72286011 - | ---- Of alloy tool steel | kg. | 40% | - |
| 72286012 - | ---- Other | kg. | 40% | - |
| --- Other : | ||||
| 72286091 - | ---- Lead bearing steel | kg. | 40% | - |
| 72286092 - | ---- Spring steel | kg. | 40% | - |
| 72286093 - | ---- Sulphur bearing steel | kg. | 40% | - |
| 72286094 - | ---- Tool and die steel | kg. | 40% | - |
| 72286099 | ---- Other | kg. | 40% | - |
| 722870 | - Angles, shapes and sections : | |||
| --- Not further worked than hot-rolled, hot-drawn or extruded : | ||||
| 72287011 | ---- Of 80 mm or more | kg. | 40% | - |
| 72287012 | ---- Of less than 80 mm | kg. | 40% | - |
| --- Not further worked than cold-formed or cold-finished : | ||||
| 72287021 | ---- Of 80 mm or more | kg. | 40% | - |
| 72287022 | ---- Of less than 80 mm | kg. | 40% | - |
| 722880 | - Hollow drill bars and rods : | |||
| 72288010 | --- Of alloy steel | kg. | 40% | - |
| 72288020 | --- Of non alloy steel, forged | kg. | 40% | - |
| 72288090 | --- Other | kg. | 40% | - |
| 7229 | wire of OTHER alloy steel | |||
| 72291000 | - Of high speed steel | kg. | 40% | - |
| 72292000 | - Of silico-manganese steel | kg. | 40% | - |
| 722990 | - Other : | |||
| ---- Tinned wire, bronze coated wire, trapezoidal wire, half round wire, crimped wire and copper coated wire, not insulated : | ||||
| 72299011 | ---- Tinned wire | kg. | 40% | - |
| 72299012 | ---- Bronze coated wire | kg. | 40% | - |
| 72299013 | ---- Trapezoidal wire | kg. | 40% | - |
| 72299014 | ---- Half round wire | kg. | 40% | - |
| 72299015 | ---- Crimped wire | kg. | 40% | - |
| 72299016 | ---- Copper coated wire | kg. | 40% | - |
| --- Electrode quality, wire rope quality and ACSR | ||||
| quality not insulated : | ||||
| 72299021 | ---- Electrode quality | kg. | 40% | - |
| 72299022 | ---- Wire rope quality | kg. | 40% | - |
| 72299023 | ---- ACSR quality | kg. | 40% | - |
| --- Wire (excluding wire type lead), spring, high tensile, hardened and tempered wires, not insulated : | ||||
| 72299031 | ---- Wire (excluding wire type lead) | kg. | 40% | - |
| 72299032 | ---- 'Spring wire | kg. | 40% | - |
| 72299033 | ---- High tensile wire | kg. | 40% | - |
| 72299034 | ---- Hardened and tempered wire | kg. | 40% | - |
| 72299040 | --- Other wire | kg. | 40% | - |
| --- Shaped and profiled wires of cross-section : | ||||
| 72299051 | ---- Half round | kg. | 40% | - |
| 72299052 | ---- Flat and rectangular | kg. | 40% . | - |
| 72299053 | ---- 'L' shape | kg. | 40% | - |
| 72299054 | ---- 'Z' shape | kg. | 40% | - |
| 72299059 | ---- Other | kg. | 40% | - |
| 72299060 | --- Electric resistance wire (including electric resistance heating wire) | kg. | 40% | - |
| 72299070 | --- Crimped wire | kg. | 40% | - |
| 72299090 | --- Other | kg. | 40% | - |