Skip to content
How to use Judgment tools
  1. Click Tools to open PDF, Print, Tag, Note, Favourite, and CiteSignal.
  2. Use Brief & Ask in the toolbar for the AI Brief and case chat.
  3. Jump to sections with the pills below the help bar.

Commissioner of Central Excise Vs. Steel Strips Alloys Ltd. and anr.

Commissioner of Central Excise vs Steel Strips Alloys Ltd. and anr.

Disposition Petition dismissed Court Himachal Pradesh Decided Sep 03, 2008
~4 min read
https://sooperkanoon.com/case/891680

For advocates & juniors · 7-day free trial

Brief this judgment before chambers

Stop skimming 50 pages - get an 18-section AI Brief on this case, ask scoped follow-ups, and find related precedents with Semantic Search. Full trial, no card required.

  • 18-section brief - facts, issues, ratio, relief
  • Ask this case - answers cite the judgment
  • Semantic search - find precedents by meaning
  • Research drawer - sections, cites, related cases

No card required · credentials emailed · Log in if you already have an account

Citation
Court
Himachal Pradesh High Court
Judge
Decided On
Subject
Excise
Disposition
Petition dismissed

Case Summary

AI-generated summary - not the official court judgment text.

- CODE OF CIVIL PROCEDURE, 1908.[C.A. No. 5/1908]. Order 14, Rule 2 [As amended by Amending Act of 1976]: [V.K. Gupta, CJ, Deepak Gupta & Surjit Singh, JJ] Preliminary issue of law and fact Court framing all issues both of law and facts together and also tried all the issues together, including the issue relating ...

Key legal issue
Excise
Outcome / disposition
Petition dismissed

Parties & Advocates

Appellant / Petitioner

Commissioner of Central Excise

Respondent

Steel Strips Alloys Ltd. and anr.

Legal References

Cases Referred
Bangalore v. Escorts Mahle Ltd.
Reported In
2008(3)ShimLC474

Excerpt

- code of civil procedure, 1908.[c.a. no. 5/1908]. order 14, rule 2 [as amended by amending act of 1976]: [v.k. gupta, cj, deepak gupta & surjit singh, jj] preliminary issue of law and fact court framing all issues both of law and facts together and also tried all the issues together, including the issue relating to jurisdiction of court held, except in situations perceived or warranted under sub-rule (2) of rule 2 of order 14 where a court in fact frames only issues of law in the first instance and postpones settlement of other issues, clearly and explicitly in situations where the court has framed all issues together, both of law as well as facts and has also tried all these issues together, it is not open to the court to adopt the principle of severability and proceed to decide issues of law first, without taking up simultaneously other issues for decision. this course of action is not available to a court because sub-rule (1) does not permit the court to adopt any such principle of severability and to dispose of a suit only on preliminary issues, or what can be termed as issues of law. sub-rule (1) clearly mandates that in a situation contemplated under it, where all the issues have been together and have also been taken up for adjudication during the course of the trial, these must be decided together and the judgment in the suit as a whole must be pronounced by the court covering all the issues framed in the suit......and meaningless?2. to decide the aforesaid questions, it would be relevant to refer to the explanation under rule 57-a, relevant portion of which reads as follows:explanation.-for the purpose of this rule, 'inputs' includes:(a) inputs which are manufactured and used within the factory of production in or, in relation to, the manufacture of final products, and(b) paints and packaging materials, but does not include:(i) machines, machinery, plant, equipment, apparatus, tools or appliances used for producing or processing or any goods or for bringing about any change in any substance in or in relation to the manufacture of the final products.3. the manufacturers claimed that the ramming mass, foundry flux, mortar, ilr mix and castable powder are inputs required for manufacture of the final products and, therefore, they are entitled to modvat credit for the same.4. on the other hand, the stand of the revenue is that these inputs are not required for the manufacture of the goods but are in fact material which is required for the maintenance of the plants, machinery etc., and are thus not included in the definition of inputs.5. the short question to be decided in the present petitions is that whether ramming mass, foundry flux, mortar, ilr mix and castable powder are inputs or not?6. shri sandeep sharma, learned assistant solicitor general has relied upon a judgment of the karnataka high court in : 1998(98)elt81(kar) , titled canara steel ltd. v. union of india and ors. wherein the karnataka high court had disallowed the claim of the manufacturer for the grant of modvat credit benefit by holding that ramming mass etc., are used as lining material and insulating material for electric are furnaces and are also used for the brick lining and they have nothing to do with the manufacture of the final goods and therefore, have to be treated as a part of the machinery and not as an input.7. on the other hand shri k.d. sood leaned counsel for some of the manufacturers has relied.....

Full Judgment

Deepak Gupta, J.

1. All the aforesaid Excise and Reference Petitions are being disposed of by a common judgment as the following common questions of law are involved in all the cases:

1. Machine, machinery, plant, apparatus, tool or appliances, etc., used for producing or processing of any goods or for bringing about any change in any substance in or in relation to the manufacture of final produce are ineligible for Modvat Credit under the exclusion clause of explanation to Rule 57-A. Ramming Mass, Foundry Flux, Mortar, ILR MIX and Castable Powder are used as part of furnace. Therefore, will not the Ramming Mass, Foundry Flux, Mortar ILR MIX and Castable Powder be covered in the excluded category of item of explanation to Rule 57-A?

2. The term machine, machinery, plant etc., have been vised in the exclusion Clause (1) to Rule 57-A in a general sense. If their constituents are taken as inclusive input when the plant or machine are not, will not the exclusion become superfluous and meaningless?

2. To decide the aforesaid questions, it would be relevant to refer to the explanation under Rule 57-A, relevant portion of which reads as follows:

Explanation.-For the purpose of this rule, 'inputs' includes:

(a) inputs which are manufactured and used within the factory of production in or, in relation to, the manufacture of final products, and

(b) paints and packaging materials, but does not include:(i) machines, machinery, plant, equipment, apparatus, tools or appliances used for producing or processing or any goods or for bringing about any change in any substance in or in relation to the manufacture of the final products.

3. The manufacturers claimed that the Ramming Mass, Foundry Flux, Mortar, ILR MIX and Castable Powder are inputs required for manufacture of the final products and, therefore, they are entitled to Modvat Credit for the same.

4. On the other hand, the stand of the revenue is that these inputs are not required for the manufacture of the goods but are in fact material which is required for the maintenance of the plants, machinery etc., and are thus not included in the definition of inputs.

5. The short question to be decided in the present petitions is that whether Ramming Mass, Foundry Flux, Mortar, ILR MIX and Castable Powder are inputs or not?

6. Shri Sandeep Sharma, learned Assistant Solicitor General has relied upon a judgment of the Karnataka High Court in : 1998(98)ELT81(Kar) , titled Canara Steel Ltd. v. Union of India and Ors. wherein the Karnataka High Court had disallowed the claim of the manufacturer for the grant of Modvat Credit benefit by holding that Ramming Mass etc., are used as lining material and insulating material for electric are furnaces and are also used for the brick lining and they have nothing to do with the manufacture of the final goods and therefore, have to be treated as a part of the machinery and not as an input.

7. On the other hand Shri K.D. Sood leaned Counsel for some of the manufacturers has relied upon the judgment of the Apex Court in : 2003(154)ELT321(SC) , Commissioner of Central Excise, Bangalore v. Escorts Mahle Ltd., wherein also the question was whether the manufacturer was entitled to Modvat Credit instead of Ramming Mass, Fibre glass and filter mesh. The Apex Court held that these were inputs within the meaning of Rule 57-A and held that the assessee was entitled to Modvat Credit on these items.

8. The items in the present case are almost identical and used for similar purpose. Similar arguments have been raised. We are of the considered opinion that these cases are squarely covered by the judgment of the Apex Court in Escorts Malik's case (supra).

9. In view of the above discussion, we answer question No. 1 by holding that Ramming Mass, Foundry Flux, Mortar, ILR MIX and Castable Powder are inputs within the meaning of explanation to Rule 57-A and hence MODVAT can be claimed in respect of the same. As far as question No. 2 is concerned, we are Of the considered view that by holding the aforesaid items to be inputs, the definition of machine, machinery, plant etc., is not changed and exclusion clause does not become superfluous and meaningless.

10. Both the questions are answered in favour of the assessee and against the revenue.

11. Consequently, the Excise Petitions are rejected and the Excise References are answered in favour of the assessee and against the revenue.

Continue Your Research


AI Briefs · Semantic Search · Save & annotate judgments

Start your 7-day free trial