Bare Act Search Results

Finance (No. 2) Act 1977 Schedule III

Title: Third Schedule

State: Central

Year: 1977

.....column against sub-item (2), the entry "Butter, whether pasteurized or not," shall be substituted; (ii) in Item No. 4, - (a) under "I. Unmanufactured tobacco -", for each of the entries in the third column against sub-items (1), (3) and (4), the entry "Twenty rupees." shall be substituted; (b) under "II. Manufactured tobacco -" for the entries in the third column against sub-Items (1), (2), (3)(i), (3)(ii) and (4), the entries "One hundred and seventy per cent. ad valorem.", "Two hundred and seventy per cent. ad valorem.", "Four rupees and sixty paise per thousand.", "One rupee and sixty paise per thousand." and "Two hundred and twenty per cent. ad valorem." shall, respectively, be substituted; (iv) in Item No. 14C, for the entry in the third column, the entry "Fifteen per cent. ad valorem." shall be substituted; (v) in Item No. 14D, for the entry in the third column, the entry "Thirty per cent. ad valorem." shall be substituted; (vi) in Item No. 14DD, for the entry in the third column, the entry "Twenty-five per cent. ad valorem." shall be substituted; (vii) in Item No. 14F, for the entry in the third column, the entry "Sixty per cent. ad valorem." shall be.....

Designs Act, 1911 Complete Act

State: Central

Year: 1911

..... SECTION 02: DEFINITIONS. In this Act, unless there is anything repugnant in the subject or context:- (1) ** (2) "article" means any article of manufacture and any substance, artificial or natural, or partly artificial and partly natural; (3) "Controller" means the Controller General of Patents, Designs and Trade Marks appointed under sub-section (1) ofsection 4 of the Trade and Merchandise Marks Act, 1958 (43 of 1958) -; (4) "copyright" means the exclusive right to apply a design to any article in any class in which the design is registered ; (5) "design" means only the features of shape, configuration, pattern or ornament applied to any article by any industrial process or means, whether manual, mechanical or chemical, separate or combined, which in the finished article appeal to and are judged solely by the eye; but does not include any mode or principle of construction or anything which is in substance a mere mechanical device, and does not include any trade mark as defined in clause (v) of sub-section (1) ofsection 2 of the Trade and Merchandise Marks Act, 1958-, or property mark as defined insection 479 of the Indian Penal Code (45 of 1860)-; (6)** (7) "High Court" means-.....

Finance Act, 1995 Complete Act

State: Central

Year: 1995

.....capital undertaking" means such domestic comply whose shares are not listed in a recognized stock exchange in India and which is engaged in the manufacture or production of such articles or things (including computer software) as may be notified by the Central Government in this behalf; (8) after clause (25), the following clause shall be inserted and shall be deemed always to have been inserted with effect from the day of April, 1962, namely :" "(25A) any income of the Employees' State Insurance Fund set up under the provisions of the Employees' State Insurance Act, 1948;"; (9) after clause (26B), the following clause shall be inserted, namely :" (26BB) any income of a corporation established by the Central Government or any State Government for promoting the interests of the members of a minority community. Explanation ." For the purposes of this clause, 'minority community' means a community notified as such by the Central Government in the Official Gazette in this behalf; SECTION 05: AMENDMENT OF SECTION 10A In section 10A of the Income-tax Act, in sub-section (2), after clause (i), the following clause shall be inserted with effect from the 1st day of April, 1996, namely......

Central Excise Tariff Act, 1985 Chapter 39

Title: Plastics and Articles Thereof

State: Central

Year: 1985

.....(headings 3901 to 3914). 8. For the purposes of heading 3917, the expression "tubes, pipes and hoses" means hollow products, whether semi-manufactures or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-fiat tubing. However, except for the last-mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed 1.5 times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes. 9. For the purposes of heading 3918, the expression "wall or ceiling coverings of plastics" applies to products in rolls, of a width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated. 10. In headings 3920 and 3921, the expression "plates, sheets, film, foil and strip" applies only to plates, sheets, film,.....

Central Excise Tariff Act, 1985 Chapter 74

Title: Copper and Articles Thereof

State: Central

Year: 1985

.....Alloys containing with other elements more than 10 per cent. by weight of copper, not usefully malleable and commonly used as an additive in the manufacture of other alloys or as de-oxidants, de-sulphurising agents or for similar uses in the metallurgy of non-ferrous metals. However, copper phosphide (phosphor copper) containing more than 15 per cent. by weight of phosphorous falls in heading 2848. (d) Bars and rods Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including"fiattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including"modified rectangular") cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which.....

Central Excise Tariff (Amendment) Act, 2004 Chapter XXXIX

Title: Plastics and Articles Thereof

State: Central

Year: 2004

.....(headings 3901 to 3914). 8. For the purposes of heading 3917, the expression "tubes, pipes and hoses" means hollow products, whether semi-manufactures or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-flat tubing. However, except for the last-mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed 1.5 times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes. 9. For the purposes of heading 3918, the expression "wall or ceiling coverings of plastics" applies to products in rolls, of a width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated. 10. In headings 3920 and 3921, the expression "plates, sheets, film, foil and strip" applies only to plates, sheets, film,.....

Central Excise Tariff (Amendment) Act, 2004 Chapter LXXIV

Title: Copper and Articles Thereof

State: Central

Year: 2004

.....Alloys containing with other elements more than 10 per cent. by weight of copper, not usefully malleable and commonly used as an additive in the manufacture of other alloys or as de-oxidants, de-sulphurising agents or for similar uses in the metallurgy of non-ferrous metals. However, copper phosphide (phosphor copper) containing more than 15 per cent. by weight of phosphorous falls in heading 2848. (d) Bars and rods Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which.....

Customs Tariff Act 1975 Chapter 39

Title: Plastics and Articles Thereof

State: Central

Year: 1975

.....(headings 3901 to 3914). 8. For the purposes of heading 3917, the expression "tubes, pipes and hoses" means hollow products, whether semi-manufactures or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-flat tubing. However, except for the last-mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed 1.5. times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes, and hoses but as profile shapes. 9. For the purposes of heading 3918, the expression "wall or ceiling coverings of plastics" applies to products in rolls, of a width not less than 45 cms, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated. 10. In headings 3920 and 3921, the expression "plates, sheets, film, foil and strip" applies only to plates, sheets,.....

Customs Tariff Act 1975 Chapter 50

Title: Silk

State: Central

Year: 1975

.....constituent fibres and has not been bleached, dyed (whether or not in the mass) or printed; or (ii) is of indeterminate colour ("grey yarn"), manufactured from garnetted stock. Such yarn may have been treated with a colourless dressing or fugitive dye (which disappears after simple washing with soap) and, in the case of man-made fibres, treated in the mass with delustring agents (for example, titanium dioxide). 4 [(b)] Bleached yarn : Yarn which: (i) has undergone a bleaching process, is made of bleached fibres or, unless the context otherwise requires, has been dyed white (whether or not in the mass) or treated with a white dressing; (ii) consists of a mixture of unbleached and bleached fibres; or (iii) is multiple (folded) or cabled and consists of unbleached and bleached yarns. 4 [(c)] Coloured (dyed or printed) yarn: Yarn which: (i) is dyed (whether or not in the mass) other than white or in a fugitive colour, or printed, or made from dyed or printed fibres; (ii) consists of a mixture of dyed fibres of different colours or of a mixture of unbleached or bleached fibres with coloured fibres (marl or mixture yarns), or is printed in one or more colours at.....

Customs Tariff Act 1975 Chapter 72

Title: Iron and Steel

State: Central

Year: 1975

.....toys, games, sports requisites); (m) Hand sieves, buttons, pens, pencil-holders, pen nibs or other articles of Chapter 96 (miscellaneous manufactured articles); or (n) Articles of Chapter 97 (for example, works of art). 2. Throughout this Schedule the expression "parts of general use" means: (a) Articles of heading 7307, 7312, 7315, 7317 or 7318 and similar articles of other base metal; (b) Springs and leaves for springs, of base metal, other than clock or watch springs (heading 9114); and (c) Articles of headings 8301, 8302, 8308, 8310 and frames and mirrors, of base metal, of heading 8306. In Chapters 73 to 76 and 78 to 82 (but not in heading 7315) references to parts of goods do not include references to parts of general use as defined above. Subject to the preceding paragraph and to Note 1 to Chapter 83, the articles of Chapter 82 or 83 are excluded from Chapters 72 to 76 and 78 to 81. 3. Throughout this Schedule, the expression "base metals" means: iron and steel, copper, nickel, aluminium, lead, zinc, tin, tungsten (wolfram), molybdenum, tantalum, magnesium, cobalt, bismuth, cadmium, titanium, zirconium, antimony, manganese, beryllium, chromium,.....