Bare Act Search Results

Medicinal and Toilet Preparations (Excise Duties) Rules, 1956 Complete Act

State: Central

Year: 1956

.....or, to determine the capacity of any cask or receptacle; (xii) "laboratory" means that part of a non-bonded or bonded manufactory in which the actual manufacture of dutiable goods takes place; (xiii) "manufacturer" means a person to whom a licence has been granted for the manufacture of dutiable goods; (xiv) "officer-in-charge" means an officer of the Excise Department of any State appointed by the collecting Government to supervise work in a bonded manufactory or a bonded warehouse and includes officers of any other Department similarly appointed; (xv) "proper officer" means an Excise Officer in whose jurisdiction the premises of the manufacturer of any dutiable goods, or of any person engaged in the process of manufacture of,or trade in such goods or containers thereof, whether as manufacturer, wholesale dealer, or intended manufacturer or wholesale dealer, are situated; (xvi) "prove" means to test the strength of alcohol by hydrometer or other suitable instrument; (xvii) "quarter" means a period of three months beginning with 1st January, 1st April, 1st July or 1st October; (xviii) "rectified spirit" means plain undenatured alcohol of a strength not less than 50.0.....

Central Excise Tariff Act, 1985 Chapter 72

Title: Iron and Steel

State: Central

Year: 1985

.....or other deformations produced during the rolling process (reinforcing bars and rods); - be twisted after rolling. (n) Angles, shapes and sections: Products having a uniform solid cross-section along their whole length which do not conform to any of the definitions at (ij), (k), (l) or (m) above or to the definition of wire. Chapter 72 does not include products of heading 7301 or 7302. (o) Wire: Cold-formed products in coils, of any uniform solid cross-section along their whole length, which do not conform to the definition of fiat-rolled products. (p) Hollow drill bars and rods: Hollow bars and rods of any cross-section, suitable for drills, of which the greatest external dimension of the cross-section exceeds 15 mm but does not exceed 52 mm, and of which the greatest internal dimension does not exceed one half of the greatest external dimension. Hollow bars and rods of iron or steel not conforming to this definition are to be classified in heading 7304. 2. Ferrous metals clad with another ferrous metal are to be classified as products of the ferrous metal predominating by weight. 3. Iron or steel products obtained by electrolytic deposition, by.....

Central Excise Tariff (Amendment) Act, 2004 Chapter LXXII

Title: Iron and Steel

State: Central

Year: 2004

.....II Application for permission to avail of the special procedure relating to stainless steel patties or pattas or aluminium circles. Name of the factory/factories...................Address............................. I/We.....................manufacturers of stainless steel patties or pattas/ aluminium circles, residing at..............taluk/tehsil...........district........and holders of Central Excise Registration No.....................dated .........................hereby apply to avail myself/ourselves during the.............calendar month/the period beginning with.........20..........and ending with...........20.............of the special procedure in respect of the production or transactions in such stainless steel patties or pattas or aluminium circles at my/our above mentioned factory/factories. 2. I/We hereby agree to abide by the terms and conditions of the said procedure throughout the said period. Place: Date: Signature of manufacturers or his/their authorized agent(s). Countersigned Superintendent of Central Excise........................ Range.......... Circle........... Place: Date: Permission granted for Calendar month........./the.....

Customs Tariff Act 1975 Chapter 72

Title: Iron and Steel

State: Central

Year: 1975

.....to be classified as an alloy of the metal which predominates by weight over each of the other metals; (b) An alloy composed of base metals of this Section and of elements not falling within this Section is to be treated as an alloy of base metals of this Section if the total weight of such metals equals or exceeds the total weight of the other elements present; (c) In this Section the term "alloys" includes sintered mixtures of metal powders, heterogeneous intimate mixtures obtained by melting (other than cermets) and intermetallic compounds. 6. Unless the context otherwise requires, any reference in this Schedule to a base metal includes a reference to alloys which, by virtue of Note 5 above, are to be classified as alloys of that metal. 7. Classification of composite articles: Except where the headings other wise require, articles of base metal (including articles of mixed materials treated as articles of base metal under the Interpretative Rules) containing two or more base metals are to be treated as articles of the base metal predominating by weight over each of the other metals. For this purpose: (a) Iron and steel, or different kinds of iron or steel, are.....

Customs Tariff (Amendment) Act, 2003 Chapter LXXII

Title: Iron and Steel

State: Central

Year: 2003

.....or other deformations produced during the rolling process (reinforcing bars and rods); - be twisted after rolling. (n) Angles, shapes and sections: Products having a uniform solid cross-section along their whole length which do not conform to any of the definitions at (ij), (k), (l) or (m) above or to the definition of wire. Chapter 72 does not include products of heading 7301 or 7302. (o) Wire: Cold-formed products in coils, of any uniform solid cross-section along their whole length, which do not conform to the definition of flat-rolled products. (p) Hollow drill bars and rods: Hollow bars and rods of any cross-section, suitable for drills, of which the greatest external dimension of the cross-section exceeds 15 mm but does not exceed 52 mm, and of which the greatest internal dimension does not exceed one half of the greatest external dimension. Hollow bars and rods of iron or steel not conforming to this definition are to be classified in heading 7304. 2. Ferrous metals clad with another ferrous metal are to be classified as products of the ferrous metal predominating by weight. 3. Iron or steel products obtained by electrolytic deposition, by.....

Income Tax Act, 1961 Schedule XIII

Title: List of Articles or Things

State: Central

Year: 1961

.....chemical fertilizers 31.02 to 31.05 2412 15. Insecticides, fungicides, herbicides and pesticides (basic manufacture and formulation) 3808.10 24211 or 24219 16. Fibre glass and articles thereof 70.14 26102 17. Manufacture of pulp wood pulp, mechanical or chemical (including dissolving pulp) 47.01 21011 18. Branded aerated water/soft drinks (non-fruit based) 2201.20 2202.20 15541 or 15542 3[19. Manufacture of pulp-wood pulp, mechanical or chemical (including dissolving pulp) 4701.00 Newsprint in rolls or sheets 4801.00 Writing or printing paper for printing of educational textbooks 4802.10 Paper or paperboard, in the manufacture of which- 4802.20 (a) the principal process of lifting the pulp is done by hand; and (b) if power driven sheet forming equipment is used, the Cylinder Mould Vat does not exceeds 40 inches .....

Finance (No. 2) Act 2009 Chapter III

Title: Direct Taxes

State: Central

Year: 2009

.....For the purposes of this sub-clause,-- (a) "specified security" means the securities as defined in clause (h) of section 2 of the Securities Contracts (Regulation) Act, 1956 (42 of 1956) and, where employees' stock option has been granted under any plan or scheme therefor, includes the securities offered under such plan or scheme; (b) "sweat equity shares" means equity shares issued by a company to its employees or directors at a discount or for consideration other than cash for providing know-how or making available rights in the nature of intellectual property rights or value additions, by whatever name called; (c) the value of any specified security or sweat equity shares shall be the fair market value of the specified security or sweat equity shares, as the case may be, on the date on which the option is exercised by the assessee as reduced by the amount actually paid by, or recovered from, the assessee in respect of such security or shares; (d) "fair market value" means the value determined in accordance with the method as may be prescribed; (e) "option" means a right but not an obligation granted to an employee to apply for the specified security or sweat equity.....

Finance (No. 2) Act 2009 Section 82

Title: Amendment of Thirteenth Schedule

State: Central

Year: 2009

.....or thing Excise classification Sub-class under National Industrial Classification (NIC), 1998 "19 Manufacture of pulp-wood pulp, mechanical or chemical (including dissolving pulp) 4701.00 Newsprint in rolls or sheets 4801.00 Writing or printing paper for printing of educational textbooks 4802.10 Paper or paperboard, in the manufacture of which-- 4802.20 (a) the principal process of lifting the pulp is done by hand; and (b) if power driven sheet forming equipment is used, the Cylinder Mould Vat does not exceeds 40 inches Maplitho paper supplied to a Braille press against an indent placed by the National Institute for Visually Handicapped, Dehradun 4802.30 Others 4802.90 Toilet or facial tissue stock, towel or napkin stock and similar paper of a kind used for household or sanitary purposes, cellulose wadding and webs of cellulose fibres, whether or not creped, crinkled, embossed,.....

States Reorganisation Act 1956 Part VII

Title: Apportionment of Assets and Liabilities of Certain Part a and Part B States

State: Central

Year: 1956

.....for the purpose of raising a public loan and having any of the forms specified in, or prescribed under, clause (2) of section 2 of the Public Debt Act, 1944 Section 83 - Refund of taxes collected in excess The liability of an existing State to refund any tax or duty on property, including land revenue, collected in excess shall be the liability of the successor State in which the property is situated, and the liability of an existing State to refund any other tax or duty collected in excess shall be the liability of the successor State in whose territories the place of assess­ment of that tax or duly is included. Section 84 - Deposits The liability of an existing State in respect of any civil deposit or local fund deposit shall, as from the appointed day, be the liability of the successor State in whose area the deposit has been made. Section 85 - Provident funds The liability of an existing State in respect of the provident fund account of a Government servant in service on the appointed day shall, as from that day, be the liability of the successor State to which that Government servant is permanently allotted. Section 86 - Pensions The liability of the.....

States Reorganisation Act 1956 Section 76

Title: Land and Goods

State: Central

Year: 1956

.....or more successor States, shall be divided between them in proportion to the total indents for stores of that class made in the period of three years ending with the 31 st day of March, 1956, for the territories of the existing State included respectively in each of those successor States excluding the indents relating to the Secretarial and offices of Heads of Departments having jurisdiction over the whole of the existing State : Provided that nothing in this sub-section shall apply to stores held for specific purposes, such as use or utilisation in particular institutions, workshops or undertakings or on particular works under construction. (3) In this section, the expression 'land' includes immovable property of every kind and any rights in or over such property, and the expression "goods" does not include coins, bank notes and currency notes.