Bare Act Search Results

Medicinal and Toilet Preparations (Excise Duties) Rules, 1956 Complete Act

State: Central

Year: 1956

.....Act, 1955; (ii) "absolute alcohol" means alcohol conforming to the British Pharmacopoeial specification for dehydrated alcohol; (iii) "bonded manufactory" means the premises or any part of the premises approved and licensed for the manufacture and storage of medicinal and toilet preparations containing alcohol, opium, Indian hemp and other narcotic drugs or narcotics on which duty has not been paid; (iv) "non-bonded manufactory" means the premises or any part of the premises approved and licensed for the manufacture and storage of medicinal and toilet preparations containing alcohol, opium, Indian hemp and other narcotic drugs or narcotics on which duty has been paid; (v) "Chemical Examiner" means the Chemical Examiner to the State Government and includes such other officer whom the State Government or the Central Government may at any time appoint as Chemical Examiner: (iv) "denatured spirit" or "denatured alcohol" means alcohol of any strength which has been rendered unfit for human consumption by the addition of substances approved by the Central Government or by the State Government with the approval of the Central Government; (vii) "duty" means the duty of excise.....

Central Excise Tariff Act, 1985 Chapter 72

Title: Iron and Steel

State: Central

Year: 1985

.....Chapter, the process of drawing or redrawing a bar, rod, wire rod, round bar or any other similar article, into bright bar, shall amount to "manufacture".] 1. In this Chapter, the following expressions have the meanings hereby assigned to them: (a) lloy pig iron: Pig iron containing, by weight, one or more of the following elements in the specified proportions: - more than 0.2% of chromium - more than 0.3% of copper - more than 0.3% of nickel - more than 0.1% of any of the following elements: aluminium, molybdenum, titanium, tungsten (wolfram), vanadium. (b) Non-alloy free-cutting steel: Non-alloy steel containing, by weight, one or more of the following elements in the specified proportions: - 0.08% or more of sulphur - 0.1% or more of lead - more than 0.05% of selenium - more than 0.01% of tellurium - more than 0.05% of bismuth. (c) Silicon-electrical steel: Alloy steels containing, by weight, at least 0.6% but not more than 6% of silicon and not more than 0.08% of carbon. They may also contain by weight not more than 1% of aluminium but no other element in a proportion that would give the steel the characteristics of another alloy steel. .....

Central Excise Tariff (Amendment) Act, 2004 Chapter LXXII

Title: Iron and Steel

State: Central

Year: 2004

.....must each exceed 10% by weight. 3. In relation to flat-rolled products of this Chapter, the process of hardening or tempering shall amount to 'manufacture'. SUPPLEMENTARY NOTE Skelp means hot-rolled narrow strip of width not exceeding 600 mm with rolled (square, slightly round or bevelled) edge. Tariff Item Description of goods Unit Rate of duty (1) (2) (3) (4) I.--PRIMARYMATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM 7201 PIG IRON AND SPIEGELEISEN IN PIGS, BLOCKS OR OTHER PRIMARY FORMS 7201 10 00 - Non-alloy pig iron containing by weight 0.5% or less of phosphorus kg. 16% 7201 20 00 - Non-alloy pig iron containing by weight more than 0.5% of phosphorus kg. 16% 7201 50 - Alloy pig iron; spiegeleisen: 7201 50 10 -- Cast iron kg. 16% 7201 50 90 -- Other kg. 16% 7202 FERRO- ALLOYS - Ferro-manganese: 7202 11 00 - Containing by weight more than 2% of carbon kg. 16% 7202 19 00 -.....

Customs Tariff Act 1975 Chapter 72

Title: Iron and Steel

State: Central

Year: 1975

.....toys, games, sports requisites); (m) Hand sieves, buttons, pens, pencil-holders, pen nibs or other articles of Chapter 96 (miscellaneous manufactured articles); or (n) Articles of Chapter 97 (for example, works of art). 2. Throughout this Schedule the expression "parts of general use" means: (a) Articles of heading 7307, 7312, 7315, 7317 or 7318 and similar articles of other base metal; (b) Springs and leaves for springs, of base metal, other than clock or watch springs (heading 9114); and (c) Articles of headings 8301, 8302, 8308, 8310 and frames and mirrors, of base metal, of heading 8306. In Chapters 73 to 76 and 78 to 82 (but not in heading 7315) references to parts of goods do not include references to parts of general use as defined above. Subject to the preceding paragraph and to Note 1 to Chapter 83, the articles of Chapter 82 or 83 are excluded from Chapters 72 to 76 and 78 to 81. 3. Throughout this Schedule, the expression "base metals" means: iron and steel, copper, nickel, aluminium, lead, zinc, tin, tungsten (wolfram), molybdenum, tantalum, magnesium, cobalt, bismuth, cadmium, titanium, zirconium, antimony, manganese, beryllium, chromium,.....

Customs Tariff (Amendment) Act, 2003 Chapter LXXII

Title: Iron and Steel

State: Central

Year: 2003

.....tears, buttons and lozenges) and those, which have been perforated, corrugated or polished, provided that they do not thereby assume the character of articles or products of other headings. Flat-rolled products of a shape other than rectangular or square, of any size, are to be classified as products of a width of 600 mm or more, provided that they do not assume the character of articles or products of other headings. (l) Bars and rods, hot-rolled, in irregularly wound coils: Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circles, segments of circles, ovals, rectangles (including squares), triangles, or other convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods). (m) Other bars and rods: Products which do not conform to any of the definitions at (ij), (A) or (l) above or to the definition of wire, which have a uniform solid cross-section along.....

Income Tax Act, 1961 Schedule XIII

Title: List of Articles or Things

State: Central

Year: 1961

.....chemical fertilizers 31.02 to 31.05 2412 15. Insecticides, fungicides, herbicides and pesticides (basic manufacture and formulation) 3808.10 24211 or 24219 16. Fibre glass and articles thereof 70.14 26102 17. Manufacture of pulp wood pulp, mechanical or chemical (including dissolving pulp) 47.01 21011 18. Branded aerated water/soft drinks (non-fruit based) 2201.20 2202.20 15541 or 15542 3[19. Manufacture of pulp-wood pulp, mechanical or chemical (including dissolving pulp) 4701.00 Newsprint in rolls or sheets 4801.00 Writing or printing paper for printing of educational textbooks 4802.10 Paper or paperboard, in the manufacture of which- 4802.20 (a) the principal process of lifting the pulp is done by hand; and (b) if power driven sheet forming equipment is used, the Cylinder Mould Vat does not exceeds 40 inches .....

Finance (No. 2) Act 2009 Chapter III

Title: Direct Taxes

State: Central

Year: 2009

.....to in clause (vii) of sub-section (2) of section 56;" ; (e) after clause (29B), the following clause shall be inserted, namely:-- '(29BA) "manufacture", with its grammatical variations, means a change in a non-living physical object or article or thing,-- (a) resulting in transformation of the object or article or thing into a new and distinct object or article or thing having a different name, character and use; or (b) bringing into existence of a new and distinct object or article or thing with a different chemical composition or integral structure;', (f) in clause (48),-- (i) in sub-clauses (a) and (b), after the words "public sector company", the words "or scheduled bank" shall respectively be inserted; (ii) after clause (c), the following Explanation shall be inserted, namely:-- 'Explanation.-- For the purposes of this clause, the expression "scheduled bank" shall have the meaning assigned to it in clause (ii) of the Explanation to sub-clause (c) of clause (viia) of sub-section (1) of section 36.'. Section 4 - Amendment of section 10 In section 10 of the Income-tax Act,-- (a) in clause (10C), after the second proviso, the following proviso shall be.....

Finance (No. 2) Act 2009 Section 82

Title: Amendment of Thirteenth Schedule

State: Central

Year: 2009

.....or thing Excise classification Sub-class under National Industrial Classification (NIC), 1998 "19 Manufacture of pulp-wood pulp, mechanical or chemical (including dissolving pulp) 4701.00 Newsprint in rolls or sheets 4801.00 Writing or printing paper for printing of educational textbooks 4802.10 Paper or paperboard, in the manufacture of which-- 4802.20 (a) the principal process of lifting the pulp is done by hand; and (b) if power driven sheet forming equipment is used, the Cylinder Mould Vat does not exceeds 40 inches Maplitho paper supplied to a Braille press against an indent placed by the National Institute for Visually Handicapped, Dehradun 4802.30 Others 4802.90 Toilet or facial tissue stock, towel or napkin stock and similar paper of a kind used for household or sanitary purposes, cellulose wadding and webs of cellulose fibres, whether or not creped, crinkled, embossed,.....

States Reorganisation Act 1956 Part VII

Title: Apportionment of Assets and Liabilities of Certain Part a and Part B States

State: Central

Year: 1956

.....for the purpose of raising a public loan and having any of the forms specified in, or prescribed under, clause (2) of section 2 of the Public Debt Act, 1944 Section 83 - Refund of taxes collected in excess The liability of an existing State to refund any tax or duty on property, including land revenue, collected in excess shall be the liability of the successor State in which the property is situated, and the liability of an existing State to refund any other tax or duty collected in excess shall be the liability of the successor State in whose territories the place of assess­ment of that tax or duly is included. Section 84 - Deposits The liability of an existing State in respect of any civil deposit or local fund deposit shall, as from the appointed day, be the liability of the successor State in whose area the deposit has been made. Section 85 - Provident funds The liability of an existing State in respect of the provident fund account of a Government servant in service on the appointed day shall, as from that day, be the liability of the successor State to which that Government servant is permanently allotted. Section 86 - Pensions The liability of the.....

States Reorganisation Act 1956 Section 76

Title: Land and Goods

State: Central

Year: 1956

.....or more successor States, shall be divided between them in proportion to the total indents for stores of that class made in the period of three years ending with the 31 st day of March, 1956, for the territories of the existing State included respectively in each of those successor States excluding the indents relating to the Secretarial and offices of Heads of Departments having jurisdiction over the whole of the existing State : Provided that nothing in this sub-section shall apply to stores held for specific purposes, such as use or utilisation in particular institutions, workshops or undertakings or on particular works under construction. (3) In this section, the expression 'land' includes immovable property of every kind and any rights in or over such property, and the expression "goods" does not include coins, bank notes and currency notes.