Bare Act Search Results

Electricity (Supply) Act, 1948 [Repealed] Section 45

Title: Power of Board to Enter Upon and Shut Down Generating Stations in Certain Circumstances

State: Central

Year: 1948

(1) If any licensee fails to close down his generating station pursuant to a declaration of the Board under section 36, or if any person establishes or acquires a new generating station or extends or replaces any plant or works in any generating station in contravention of section 44, the Board may authorise any of its officers to enter upon the premises of such station and shut down the station or the plant or works, as the case may be, in respect of which the failure or contravention has occurred. (2) Any expenses incurred by the Board under this section shall be recoverable by it from the licensee or person concurred as an arrear of land revenue, and for such purpose the Board shall be deemed to be a public officer within the meaning of section 5 of the Revenue Recovery Act, 1890 (1 of 1890). (3) Any difference or dispute arising out of the provisions of this section shall be referred to the arbitration of the Authority.

Central Excise Tariff Act, 1985 Chapter 73

Title: Articles of Iron or Steel

State: Central

Year: 1985

.....composition of steel as defined in Note 1(d) to Chapter 72. 2. In this Chapter, the word "wire" means hot or cold formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm. 3. In relation to pipes and tubes of headings 7304, 7305 and 7306, the process of drawing or redrawing shall amount to 'manufacture'. 4. In relation to products of this Chapter, the process of galvanization shall amount to 'manufacture'. 5. In relation to the pipes and tubes of headings 1 [7304, 7305 and 7306] the process of coating with cement or polyethylene or other plastic materials shall amount to 'manufacture'. Tariff Item Description of goods Unit Rate of duty (1) (2) (3) (4) 7301 SHEET PILING OF IRON OR STEEL, WHETHER OR NOT DRILLED, PUNCHED OR MADE FROM ASSEMBLED ELEMENTS; WELDED ANGLES, SHAPES AND SECTIONS, OF IRON OR STEEL 7301 10 00 - -SHEET P ILING KG. 16% 7301 20 - -Angles, shapes and sections : .....

The Haryana Municipal Corporation Act, 1994 Complete Act

State: Haryana

Year: 1994

THE HARYANA MUNICIPAL CORPORATION ACT, 1994 THE HARYANA MUNICIPAL CORPORATION ACT, 1994 (Haryana Act No. 16 of 1994) Table of Contents CHAPTER-1 PRELIMINARY Sections 1. Short title, extent and commencement. 2. Definitions. 3. Declaration of Municipal area as Corporation. CHAPTER "II CONSTITUTION OF CORPORATION 4. Incorporation and Constitution of Corporation. 5. Duration of Corporation. 6. Delimitation of Wards. 7. Qualification for members. 8. Disqualification of members. 9. Election to the Corporation. 10. Constitution and Composition of Wards Committees etc. 11. Reservation of seats. 12. Right to Votes. 13. Filling of Casual Vacancies. 14. Publication of results of elections. 15. Election petitions. 16. Relief that may be claimed by petitioner 17. Grounds for declaring election to be void. 18. Procedure to be followed by prescribed authority. 19. decision of prescribed authority. 20. Procedure in case of equality of votes. 21. Finality of decision. Sections: 22. Corrupt practices. 23. Maintenance of secrecy of voting. 24. Officers etc. at elections not to act for candidates or to influence voting. 25......

Bengal Municipal Act, 1932 Complete Act

State: West Bengal

Year: 1932

.....sanction of the Governor General has been obtained under sub-section (3) of section 80A of the Government of .India Act to the passing of this Act; It is hereby enacted as follows CHAPTER 1 PRELIMINARY Section 1 Short title, extent and commencement (1)This Act may be called the Bengal Municipal Act, 1932. (2) It extends to the whole of [West Bengal], except Calcutta as defined fay clause (11) of section 3 of the Calcutta Municipal Act, 1923. (3) It shall come into force on such date as the (State Government] may, by notification, appoint. (4) Notwithstanding anything contained in sub-section (2), it shall not take effect in any cantonment or part of a cantonment without the consent of the [Central Government] previously obtained. (5) Notwithstanding anything contained in sub-section (2), the provisions of this Act shall apply to the district of Darjeeling or any part thereof subject to such exceptions and modifications as the State Government may, by notification, direct. Section 2 Savings .- ********* All municipalities constituted, ****** limits defined, regulations, measurements and divisions made, licenses and notices issued, taxes, tolls, rates and fees.....

Kolkata Municipal Corporation Act, 1980 Complete Act

State: West Bengal

Year: 1980

..... (7) "building of the warehouse class" means a building, the whole or a substantial part of which is used, or intended to be used, as a warehouse, factory, manufactory, brewery, or distillery, or for any similar purpose, which is neither a "domestic building" nor a "public building" as defined in this section, and includes a hut used or intended to be used for any of the purposes mentioned in this clause; (8) "bustee" means an area containing land not less than seven hundred square metres in area occupied by or for the purposes of any collection of huts or other structures used or intended to be used for human habitation. Explanation.-If any question arises as to whether any particular area is or is not a bustee, the Corporation shall decide the question and its decision shall be final; (9) "Kolkata" means the area described in Schedule I; 3 Clause (10) omitted by s. 2 of the Calcutta Municipal Corporation (Amendment) Act, 1996 (West Ben. Act VI of 1996) (with retrospective effect from 4.12.1995), which was earlier as under: '(10) "candidate" in section 75 and in Schedule III means a person who has been nominated as a candidate at any election of a Councillor or who claims.....

Central Excise Tariff (Amendment) Act, 2004 Chapter LXXII

Title: Iron and Steel

State: Central

Year: 2004

.....II Application for permission to avail of the special procedure relating to stainless steel patties or pattas or aluminium circles. Name of the factory/factories...................Address............................. I/We.....................manufacturers of stainless steel patties or pattas/ aluminium circles, residing at..............taluk/tehsil...........district........and holders of Central Excise Registration No.....................dated .........................hereby apply to avail myself/ourselves during the.............calendar month/the period beginning with.........20..........and ending with...........20.............of the special procedure in respect of the production or transactions in such stainless steel patties or pattas or aluminium circles at my/our above mentioned factory/factories. 2. I/We hereby agree to abide by the terms and conditions of the said procedure throughout the said period. Place: Date: Signature of manufacturers or his/their authorized agent(s). Countersigned Superintendent of Central Excise........................ Range.......... Circle........... Place: Date: Permission granted for Calendar month........./the.....

Central Excise Tariff Act, 1985 Chapter 72

Title: Iron and Steel

State: Central

Year: 1985

.....or other deformations produced during the rolling process (reinforcing bars and rods); - be twisted after rolling. (n) Angles, shapes and sections: Products having a uniform solid cross-section along their whole length which do not conform to any of the definitions at (ij), (k), (l) or (m) above or to the definition of wire. Chapter 72 does not include products of heading 7301 or 7302. (o) Wire: Cold-formed products in coils, of any uniform solid cross-section along their whole length, which do not conform to the definition of fiat-rolled products. (p) Hollow drill bars and rods: Hollow bars and rods of any cross-section, suitable for drills, of which the greatest external dimension of the cross-section exceeds 15 mm but does not exceed 52 mm, and of which the greatest internal dimension does not exceed one half of the greatest external dimension. Hollow bars and rods of iron or steel not conforming to this definition are to be classified in heading 7304. 2. Ferrous metals clad with another ferrous metal are to be classified as products of the ferrous metal predominating by weight. 3. Iron or steel products obtained by electrolytic deposition, by.....

Customs Tariff Act 1975 Chapter 72

Title: Iron and Steel

State: Central

Year: 1975

.....to be classified as an alloy of the metal which predominates by weight over each of the other metals; (b) An alloy composed of base metals of this Section and of elements not falling within this Section is to be treated as an alloy of base metals of this Section if the total weight of such metals equals or exceeds the total weight of the other elements present; (c) In this Section the term "alloys" includes sintered mixtures of metal powders, heterogeneous intimate mixtures obtained by melting (other than cermets) and intermetallic compounds. 6. Unless the context otherwise requires, any reference in this Schedule to a base metal includes a reference to alloys which, by virtue of Note 5 above, are to be classified as alloys of that metal. 7. Classification of composite articles: Except where the headings other wise require, articles of base metal (including articles of mixed materials treated as articles of base metal under the Interpretative Rules) containing two or more base metals are to be treated as articles of the base metal predominating by weight over each of the other metals. For this purpose: (a) Iron and steel, or different kinds of iron or steel, are.....

Customs Tariff (Amendment) Act, 2003 Chapter LXXII

Title: Iron and Steel

State: Central

Year: 2003

.....or other deformations produced during the rolling process (reinforcing bars and rods); - be twisted after rolling. (n) Angles, shapes and sections: Products having a uniform solid cross-section along their whole length which do not conform to any of the definitions at (ij), (k), (l) or (m) above or to the definition of wire. Chapter 72 does not include products of heading 7301 or 7302. (o) Wire: Cold-formed products in coils, of any uniform solid cross-section along their whole length, which do not conform to the definition of flat-rolled products. (p) Hollow drill bars and rods: Hollow bars and rods of any cross-section, suitable for drills, of which the greatest external dimension of the cross-section exceeds 15 mm but does not exceed 52 mm, and of which the greatest internal dimension does not exceed one half of the greatest external dimension. Hollow bars and rods of iron or steel not conforming to this definition are to be classified in heading 7304. 2. Ferrous metals clad with another ferrous metal are to be classified as products of the ferrous metal predominating by weight. 3. Iron or steel products obtained by electrolytic deposition, by.....

Code of Criminal Procedure, 1898 Complete Act

State: Central

Year: 1898

.....(2) of Section 5, for the words 'but subject to any enactment', substitute the words 'but, save as otherwise provided by this Code, subject to any enactment'. [W.B. Act 8 of 1970, Section 3 and Sch., item 2]. (1) All offences under the Indian Penal Code shall be investigated, inquired into, tried and otherwise dealt with according to the provisions hereinafter contained. Trial of offences against other laws (2) All offences under any other law shall be investigated, inquired into, tried, and otherwise dealt with according to the same provisions, but subject to any enactment for the time being in force regulating the manner or place of investigating, inquiring into, trying or otherwise dealing with such offences. PART 2 CONSTITUTION AND POWERS OF CRIMINAL COURTS AND OFFICES: CHAPTER 2: OF THE CONSTITUTION OF CRIMINAL COURTS AND OFFICES: SECTION 6: Glasses of Criminal Courts: Besides the High Courts and the Courts constituted under any law other than this Code for the time being in force, there shall be five classes of Criminal Courts in [India], namely,- : State Amendments GUJARAT.-In its application to the State of Gujarat the amendment made in Section 6 is the.....