Bare Act Search Results

National Highways Act, 1956 Complete Act

State: Central

Year: 1956

.....revised estimate is not likely to exceed, or does not exceed Rs. 10 lakhs: Provided further that the excess of expenditure is caused only by routine factors such as increase in the cost of labour or material and not due to revision in the scope or enlargement of the work or specifications already approved. (4) Where the expenditure upon any original work on a national highway is likely at any time to exceed, or exceeds, the amount of the estimate of the cost for such work no funds shall be allotted to the work by the Central Government in the cases provided for in sub-rule (1), (2) or (3), unless the provisions of those sub-rules are complied with except in cases where the Central Government directs otherwise.Explanation.- For the removal of doubts, it is hereby declared that in cases where the excess of expenditure is less than the percentage or amount specified in sub-rule (1) or sub- rule (2), it is not necessary to obtain technical approval and financial sanction of the Centrali Government for the revised estimate in accordance with those sub-rules only if the excess of expenditure is caused by routine factors such as increase in the cost of labour or material and not due to.....

West Bengal Schools (Recruitment of Non Teaching Staff) Rules, 2o05 Complete Act

State: West Bengal

Year: 2005

.....for the reason of a severe emergency or natural calamity. (b) If the interview is postponed, the selection committee shall forthwith communicate the fact to the District Inspector of Schools and shall obtain his approval (but not his sanction afresh) for holding the interview on any other date. (9) (a) All the candidates who turn up for the interview shall, before the interview, be required by the selection committee to record their attendance on a sheet of paper. (b) The selection committee shall sign on the call letter of every candidate who appeared at the interview and shall, along with every panel, submit to the District Inspector of Schools a certificate to that effect. Rule 9 Allotment of marks (1) (a) For selection of a Librarian in a school, (i) full marks for possessing the qualifications shall be as follows: (A) Certificate of passing Madhyamik Examination (or equivalent) 10 marks (B) Certificate of passing Higher Secondary Examination [or equivalent including old Higher Secondary Examination (class XI)] 10 marks (C) Bachelor's Degree 10 marks (D) Certificate in Library Science or 10 marks Diploma in Library Science or 15 marks Degree in Library Science 20.....

Credit Information Companies (Regulation) Act, 2005 Complete Act

State: Central

Year: 2005

.....to the available business of credit information, the potential and scope for expansion of existing credit information companies and other relevant factors, determine the total number of the credit information companies which may be granted the certificates of registration for carrying on the business of credit information: Provided that the total number of such credit information companies so determined may, on being satisfied by the Reserve Bank, that there is change in available business of credit information, potential and scope for expansion of existing credit information companies and other relevant factors relating thereto, be reviewed by the Reserve Bank. SECTION 6: Power of Reserve Bank to cancel certificate of registration: (1) The Reserve Bank may cancel a certificate of registration granted to a credit information company under sub-sec. (2) of Sec. 5 if such company, (i) ceases to carry on the business of credit information; or (ii) has failed to comply with any of the conditions subject to which the certificate of registration has been granted to it; or (iii) at any time fails to fulfil any of the conditions referred to in sub-clauses (a) to (c) of sub-sec. (1).....

Central Excise Tariff Act, 1985 Chapter 79

Title: Zine and Articles Thereof

State: Central

Year: 1985

.....been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. (b) Profiles Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. (c) Wire Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "fiattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or.....

Central Excise Tariff (Amendment) Act, 2004 Chapter LXXIX

Title: Zinc and Articles Thereof

State: Central

Year: 2004

.....been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. (b) Profiles Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. (c) Wire Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or.....

Customs Tariff Act 1975 Chapter 79

Title: Zinc and Articles Thereof

State: Central

Year: 1975

.....been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. (b)Profiles :Rolled, extruded, drawn, forged or formed products, coil ed or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. (c)Wire :Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or.....

Customs Tariff (Amendment) Act, 2003 Chapter LXXIX

Title: Zinc and Articles Thereof

State: Central

Year: 2003

.....been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. (b) Profiles Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. (c) Wire Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or.....

Credit Information Companies (Regulation) Act, 2005 Chapter I

Title: Preliminary

State: Central

Year: 2005

.....means a company formed and registered under the Companies Act, 1956(1 of 1956) and which has been granted a certificate of registration under sub-section (2) of section 5; (f) "credit institution" means a banking company and includes-- (i) a corresponding new bank, the State Bank of India, a subsidiary bank, a co-operative bank, the National Bank and regional rural bank; (ii) a non-banking financial company as defined under clause (f) of section 45-I of the Reserve Bank of India Act, 1934(2 of 1934); (iii) a public financial institution referred to in section 4A of the Companies Act, 1956(1 of 1956); (iv) the financial corporation established by a State under section 3 of the State Financial Corporation Act, 1951(63 of 1951); (v) the housing finance institution referred to in clause (d) of section 2 of the National Housing Bank Act, 1987(53 of 1987); (vi) the companies engaged in the business of credit cards and other similar cards and companies dealing with distribution of credit in any other manner; (vii) any other institution which the Reserve Bank may specify, from time to time, for the purposes of this clause; (g) "credit scoring" means a system which.....

Credit Information Companies (Regulation) Act, 2005 Section 2

Title: Definitions

State: Central

Year: 2005

.....means a company formed and registered under the Companies Act, 1956(1 of 1956) and which has been granted a certificate of registration under sub-section (2) of section 5; (f) "credit institution" means a banking company and includes-- (i) a corresponding new bank, the State Bank of India, a subsidiary bank, a co-operative bank, the National Bank and regional rural bank; (ii) a non-banking financial company as defined under clause (f) of section 45-I of the Reserve Bank of India Act, 1934(2 of 1934); (iii) a public financial institution referred to in section 4A of the Companies Act, 1956(1 of 1956); (iv) the financial corporation established by a State under section 3 of the State Financial Corporation Act, 1951(63 of 1951); (v) the housing finance institution referred to in clause (d) of section 2 of the National Housing Bank Act, 1987(53 of 1987); (vi) the companies engaged in the business of credit cards and other similar cards and companies dealing with distribution of credit in any other manner; (vii) any other institution which the Reserve Bank may specify, from time to time, for the purposes of this clause; (g) "credit scoring" means a system which.....

Credit Information Companies (Regulation) Act, 2005 Chapter V

Title: Functions of Credo Information Companies

State: Central

Year: 2005

.....such other functions as are necessary to facilitate proper conduct of its affairs, business and functions in accordance with the provisions of this Act. Section 15 - Credit Institution to be Member of a Credit Information Company (1) Every credit institution in existence on the commencement of this Act, before the expiry of three months from such commencement or within such extended period, as the Reserve Bank may allow on its application and subject to being satisfied about the reason for extension, shall become member of at least one credit information company. (2) Every credit institution which comes into existence after the commencement of this Act, before the expiry of three months from its coming into existence, or within such extended period, as the Reserve Bank may allow on its application and subject to being satisfied about the reason for extension, shall become member of at least one credit information company. (3) A credit information company may, at its option, become member of another credit information company. (4) No credit information company shall refuse to register a credit institution or another credit information company as its member without.....