Bare Act Search Results

Merchant Shipping Act, 1958 Complete Act

State: Central

Year: 1958

.....To meet the immediate requirements of the country soon after independence the Merchant Shipping Laws. (Extension to Acceding States and Amendment) Act, 1949 was enacted, by which the British Merchant Shipping Acts 1894 to 1938 were extended to the Acceding States (later known as Part B States) and Indian Consular Officers were empowered to perform functions in relation to Indian ships outside India and provision was made to enable Government to prescribe the proper national colours for ships registered in India, The Control of Shipping Act, 1947, was another short-term measure which continued the war-time control over Indian shipping and controlled the coastal trade by a system of licensing. This Act, which has been renewed from time to time, is due to expire on the 31st March, 1958. 3. The present Bill revises and consolidates all laws in force in India relating to merchant shipping, whether passed by the British Parliament or the Indian Legislature, and makes provision for the matters discussed in the succeedihg paragraphs, which also indicate the principal changes made in the law ........... -Gaz. of Ind., 1958, Extra., Pt. II, S. 2, p. 203.Act 21 of 1966.- The minimum.....

Central Excise Tariff Act, 1985 Chapter 73

Title: Articles of Iron or Steel

State: Central

Year: 1985

.....composition of steel as defined in Note 1(d) to Chapter 72. 2. In this Chapter, the word "wire" means hot or cold formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm. 3. In relation to pipes and tubes of headings 7304, 7305 and 7306, the process of drawing or redrawing shall amount to 'manufacture'. 4. In relation to products of this Chapter, the process of galvanization shall amount to 'manufacture'. 5. In relation to the pipes and tubes of headings 1 [7304, 7305 and 7306] the process of coating with cement or polyethylene or other plastic materials shall amount to 'manufacture'. Tariff Item Description of goods Unit Rate of duty (1) (2) (3) (4) 7301 SHEET PILING OF IRON OR STEEL, WHETHER OR NOT DRILLED, PUNCHED OR MADE FROM ASSEMBLED ELEMENTS; WELDED ANGLES, SHAPES AND SECTIONS, OF IRON OR STEEL 7301 10 00 - -SHEET P ILING KG. 16% 7301 20 - -Angles, shapes and sections : .....

Central Excise Tariff (Amendment) Act, 2004 Chapter LXXIII

Title: Articles of Iron or Steel

State: Central

Year: 2004

.....exceeds 16 mm. 3. In relation to pipes and tubes of headings 7304, 7305 and 7306, the process of drawing or redrawing shall amount to 'manufacture'. 4. In relation to products of this Chapter, the process of galvanization shall amount to 'manufacture'. 5. In relation to the pipes and tubes of headings 7304 and 7305, the process of coating with cement or polyethylene or other plastic materials shall amount to 'manufacture'. Tariff Item Description of goods Unit Rate of duty (1) (2) (3) (4) 7301 SHEET PILING OF IRON OR STEEL, WHETHER OR NOT DRILLED, PUNCHED OR MADE FROM ASSEMBLED ELEMENTS; WELDED ANGLES, SHAPES AND SECTIONS, OF IRON OR STEEL 7301 10 00 Sheet piling kg. 16% 7301 20 Angles, shapes and sections: 7301 20 10 Steel slotted angles kg. 16% 7301 20 90 Other kg. 16% 7302 RAILWAY OR TRAMWAY TRACK CONSTRUCTION MATERIAL OF IRON OR STEEL, THE FOLLOWING: RAILS, CHECK-RAILS AND RACK RAILS, SWITCH BLADES, CROSSING FROGS, POINT RODS AND OTHER CROSSING PIECES,.....

Customs Tariff Act 1975 Chapter 73

Title: Articles of Iron or Steel

State: Central

Year: 1975

.....composition of steel as defined in Note 1 (d) to Chapter 72. 2. In this Chapter the word "wire" means hot or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm. Tariff Item Description of goods Unit Rate of duty Std. Prefnl. Areas (1) (2) (3) (4) (5) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 7301 10 00 - Sheet piling kg. [10%]8 - 7301 20 - Angles, shapes and sections : 7301 20 10 --- Steel slotted angles kg. [10%]8 - 7301 20 90 --- Other kg. [10%]8 - 7302 Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail .....

Indian Dock Labourers Act, 1934 [Repealed] Section 5

Title: Power to Central Government to Make Regulations

State: Central

Year: 1934

.....nearest place of treatment; (r) prescribing the provision to be made for the rescue of immersed workers from drowning; (s) prescribing the abstracts of this Act and of the regulations required by Sec. 8; (t) providing for the submission of notices of accidents and dangerous occurrences and prescribing the form of such notices, the persons and authorities to whom they are to be furnished, the particulars to be contained in them and the time within which they are to be submitted ; (u) specifying the persons and authorities who shall be responsible for compliance with regulations made under this Act; (v) defining the circumstances in which and condition subject to which exemptions from any of the regulations made under this section may be given, specifying the authorities who may grant such exemptions and regulating their procedure; (w) defining the additional powers which Inspectors may exercise under Clause (c) of Section 4; and (x) providing generally for the safety of workers. (2) Regulations made under this section may make special provisions to meet the special requirements of any particular port or ports. (3) In making a regulation under this section, the.....

Customs Tariff (Amendment) Act, 2003 Chapter LXXIII

Title: Articles of Iron or Steel

State: Central

Year: 2003

.....30% - 732620 - Articles of iron or steel wire : 73262010 --- Tyre bead wire rings intended for use in the manufacture of tyres for cycles and cycle-rickshaws kg. 30% 73262090 --- Other kg. 30% - 732690 - Other : 73269010 --- Belt lacing of steel kg. 30% - 73269020 --- Belt fasteners for machinery belts kg. 30% - 73269030 --- Drain covers, plates, and frames for sewages, water or similar system kg. 30% - 73269040 --- Enamelled iron ware kg. 30% - 73269050 --- Grinding media balls and cylpebs kg. 30% - 73269060 --- Manufactures of stainless steel kg. 30% - 73269070 --- Articles of clad metal kg. 30% - 73269080 --- Parts of ships, floating structure and vessels (excluding hull, propellers and paddle-wheels) kg. 30% - --- Other : 73269091 ---- Shanks kg. 30% - 73269099 ---- Other kg. 30% -

Dock Labourers Act, 1934 Complete Act

State: Central

Year: 1934

.....of premises of ships where the processes are carried on; and (b) the manner in which Inspectors are to exercise the powers conferred on them by this Act. SECTION 07: GENERAL PROVISIONS RELATING TO REGULATIONS AND RULES (1) The power to make regulations and rules conferred by Secs. 5-and6-is subject to the conditions of the regulations and rules being made after previous publication. (2) Regulations and rules shall be published in the10[official Gazette] SECTION 08: ABSTRACTS OF ACT AND REGULATIONS TO BE CONSPICUOUSLY POSTED - There shall be affixed in some conspicuous place near the main entrance of every dock, wharf, quay or similar premises where the processes are carried on, in English and of the Regulations made thereunder which may be prescribed by the Regulations. SECTION 09: PENALTIES -Any person who- (a) wilfully obstructs an Inspector in the exercise of any power under Sec. 4-or fails to produce on demand by an Inspector any register or other documents kept in pursuance of the Regulations made under this Act, or any gear, fixed or loose, used for the processes, or conceals or prevents or attempts to prevent any person from appearing before, or being examined by, an.....