Bare Act Search Results

Geneva Conventions Act, 1960 Complete Act

State: Central

Year: 1960

.....(d) procedural matters relating to legal representation, appeals, etc. 3. The existing law on the subject is to be found in the Geneva Convention Act, 1911 (an Act of the United Kingdom) as applied to India by the Gevena Convention Act, 1911 (British India) Order-in-Council dated the 24th October, 1916, and the Geneva Convention Implementing Act, 1936 (14 of 1936). The provisions of these Acts, however, are confined to extending protection to the two emblems, namely, the Red Cross and the Geneva Cross. 4. The Bill seeks to implement the Conventions in so far as it is necessary so to do and, at the same time, consolidates the law on the subject by repealing the United Kingdom Act of 1911andthe Central Act 14 of 1936and incorporating their provisions in the Bill." - Gaz. of Ind., 1959, Extra. Pt. II, S. 2, p. 1098. An Act to enable effect to be given to certain International Conventions done at Geneva on the twelfth day of August, 1949, to which India is a party, and for purposes connected therewith. Be it enacted by Parliament in the Eleventh Year of the Republic of India as follows :- -Geneva Conventions of 12th August, 1949, were ratified by the President on the 16th October,.....

Central Excise Tariff Act, 1985 Chapter 72

Title: Iron and Steel

State: Central

Year: 1985

.....or other deformations produced during the rolling process (reinforcing bars and rods); - be twisted after rolling. (n) Angles, shapes and sections: Products having a uniform solid cross-section along their whole length which do not conform to any of the definitions at (ij), (k), (l) or (m) above or to the definition of wire. Chapter 72 does not include products of heading 7301 or 7302. (o) Wire: Cold-formed products in coils, of any uniform solid cross-section along their whole length, which do not conform to the definition of fiat-rolled products. (p) Hollow drill bars and rods: Hollow bars and rods of any cross-section, suitable for drills, of which the greatest external dimension of the cross-section exceeds 15 mm but does not exceed 52 mm, and of which the greatest internal dimension does not exceed one half of the greatest external dimension. Hollow bars and rods of iron or steel not conforming to this definition are to be classified in heading 7304. 2. Ferrous metals clad with another ferrous metal are to be classified as products of the ferrous metal predominating by weight. 3. Iron or steel products obtained by electrolytic deposition, by.....

Central Excise Tariff (Amendment) Act, 2004 Chapter LXXII

Title: Iron and Steel

State: Central

Year: 2004

.....II Application for permission to avail of the special procedure relating to stainless steel patties or pattas or aluminium circles. Name of the factory/factories...................Address............................. I/We.....................manufacturers of stainless steel patties or pattas/ aluminium circles, residing at..............taluk/tehsil...........district........and holders of Central Excise Registration No.....................dated .........................hereby apply to avail myself/ourselves during the.............calendar month/the period beginning with.........20..........and ending with...........20.............of the special procedure in respect of the production or transactions in such stainless steel patties or pattas or aluminium circles at my/our above mentioned factory/factories. 2. I/We hereby agree to abide by the terms and conditions of the said procedure throughout the said period. Place: Date: Signature of manufacturers or his/their authorized agent(s). Countersigned Superintendent of Central Excise........................ Range.......... Circle........... Place: Date: Permission granted for Calendar month........./the.....

Customs Tariff Act 1975 Chapter 72

Title: Iron and Steel

State: Central

Year: 1975

.....to be classified as an alloy of the metal which predominates by weight over each of the other metals; (b) An alloy composed of base metals of this Section and of elements not falling within this Section is to be treated as an alloy of base metals of this Section if the total weight of such metals equals or exceeds the total weight of the other elements present; (c) In this Section the term "alloys" includes sintered mixtures of metal powders, heterogeneous intimate mixtures obtained by melting (other than cermets) and intermetallic compounds. 6. Unless the context otherwise requires, any reference in this Schedule to a base metal includes a reference to alloys which, by virtue of Note 5 above, are to be classified as alloys of that metal. 7. Classification of composite articles: Except where the headings other wise require, articles of base metal (including articles of mixed materials treated as articles of base metal under the Interpretative Rules) containing two or more base metals are to be treated as articles of the base metal predominating by weight over each of the other metals. For this purpose: (a) Iron and steel, or different kinds of iron or steel, are.....

Customs Tariff (Amendment) Act, 2003 Chapter LXXII

Title: Iron and Steel

State: Central

Year: 2003

.....or other deformations produced during the rolling process (reinforcing bars and rods); - be twisted after rolling. (n) Angles, shapes and sections: Products having a uniform solid cross-section along their whole length which do not conform to any of the definitions at (ij), (k), (l) or (m) above or to the definition of wire. Chapter 72 does not include products of heading 7301 or 7302. (o) Wire: Cold-formed products in coils, of any uniform solid cross-section along their whole length, which do not conform to the definition of flat-rolled products. (p) Hollow drill bars and rods: Hollow bars and rods of any cross-section, suitable for drills, of which the greatest external dimension of the cross-section exceeds 15 mm but does not exceed 52 mm, and of which the greatest internal dimension does not exceed one half of the greatest external dimension. Hollow bars and rods of iron or steel not conforming to this definition are to be classified in heading 7304. 2. Ferrous metals clad with another ferrous metal are to be classified as products of the ferrous metal predominating by weight. 3. Iron or steel products obtained by electrolytic deposition, by.....

Transfer of Property Act, 1882 Chapter III

Title: Of Sales of Immoveable Property

State: Central

Year: 1882

.....on such amount or part1[from the date on which possession has been delivered]. (5) The buyer is bound- (a) to disclose to the seller any fact as to the nature or extent of the seller's interest in the property of which the buyer is aware, but of which he has reason to believe that the seller is not aware, and which materially increases the value of such interest; (b) to pay or tender, at the time and place of completing the sale, the purchase-money to the seller or such person as he directs: provided that, where the property is sold free from encumbrances, the buyer may retain out of the purchase-money the amount of any encumbrances on the property existing at the date of the sale, and shall pay the amount so retained to the persons entitled thereto; (c) where the ownership of the property has passed to the buyer, to bear any loss arising from the destruction, injury or decrease in value of the property not caused by the seller; (d) where the ownership of the property has passed to the buyer, as between himself and the seller, to pay all public charges and rent which may become payable in respect of the property, the principal moneys due on any encumbrances.....

Transfer of Property Act, 1882 Section 55

Title: Rights and Liabilities of Buyer and Seller

State: Central

Year: 1882

.....on such amount or part1[from the date on which possession has been delivered]. (5) The buyer is bound- (a) to disclose to the seller any fact as to the nature or extent of the seller's interest in the property of which the buyer is aware, but of which he has reason to believe that the seller is not aware, and which materially increases the value of such interest; (b) to pay or tender, at the time and place of completing the sale, the purchase-money to the seller or such person as he directs: provided that, where the property is sold free from encumbrances, the buyer may retain out of the purchase-money the amount of any encumbrances on the property existing at the date of the sale, and shall pay the amount so retained to the persons entitled thereto; (c) where the ownership of the property has passed to the buyer, to bear any loss arising from the destruction, injury or decrease in value of the property not caused by the seller; (d) where the ownership of the property has passed to the buyer, as between himself and the seller, to pay all public charges and rent which may become payable in respect of the property, the principal moneys due on any encumbrances.....

The Mumbai Municipal Corporation Act 1888 Complete Act

State: Central

Year: 1888

THE MUMBAI MUNICIPAL CORPORATION ACT 1888 THE MUMBAI MUNICIPAL CORPORATION ACT 1888 An Act to consolidate and amend the law relating to the Municipal Government of '[Brihan Mumbai]. Preamble. WHEREAS it is expedient to consolidate and amend the law relating to the Municipal Government of '[Brihan Mumbai]; It is enacted as follows: CHAPTER I PRELIMINARY SECTION 01: SHORT TITLE AND EXTENT This Act may be cited as 2 [the Mumbai Municipal Corporation Act, 1888] 3 [It] extends only to 1 [Brihan Mumbai]. SECTION 02: REPEAL OF ENACTMENTS The enactments mentioned in Schedule A are repealed to the extent specified in the third column of the said Schedule: Provided that- (a) all rules and by-laws made, all notifications published, all orders issued and all I licenses and permissions granted under any of the said enactments and still in force shall, so far as they are consistent with this Act, be deemed to have been respectively made, published, issued and granted hereunder; and (b) all debts and obligations incurred, all contracts entered into and all matters and things engaged to be done, by, with or for the municipal corporation before this Act comes into force shall be.....

The Transfer of Property Act, 1882 Complete Act

State: Central

Year: 1882

.....for relief, whether such debt or beneficial interest be existent, accruing, conditional or contingent;] 17 ["a person is said to have notice" of a fact when he actually knows that fact, or when, but for wilful abstention from an enquiry or search which he ought to have made, or gross negligence, he would have known it. Explanation 1. "Where any transaction relating to immovable property is required by law to be and has been effected by a registered instrument, any person acquiring such property or any part of, or share or interest in, such property shall be deemed to have notice of such instrument as from the date of registration or, where the property is not all situated in one sub-district, or where the registered instrument has been registered under sub-section (2) of section 30 of the Indian Registration Act, 1908 (16 of 1908), from the earliest date on which any memorandum of such registered instrument has been filed by any Sub-Registrar within whose sub-district any part of the property which is being acquired, or of the property wherein a share or interest is being acquired, is situated:] Provided that " (1) the instrument has been registered and its registration.....

Central Excise Tariff Act, 1985 Chapter 64

Title: Footwear, Gaiters and the Like; Parts of Such Articles

State: Central

Year: 1985

..... PARTS OF FOOTWEAR (INCLUDING UPPERS WHETHER OR NOT ATTACHED TO SOLES OTHER THAN OUTER SOLES); REMOVABLE IN-SOLES, HEEL CUSHIONS AND SIMILAR ARTICLES; GAITERS, LEGGINGS AND SIMILAR ARTICLES, AND PARTS THEREOF 6406 10 - Uppers and parts thereof, other than stiffeners: 6406 10 10 --- Embroidered uppers of textile materials kg. 16% 6406 10 20 --- Leather uppers (prepared) kg. 16% 6406 10 30 --- Goat lining kg. 16% 6406 10 40 --- Sheep lining kg. 16% 6406 10 90 --- Other kg. 16% 6406 20 00 - Outer soles and heels, of rubber or plastics kg. 16% - Other: 6406 91 00 -- Of wood kg. 16% 6406 99 -- Of other materials: 6406 99 10 --- Leather parts of footwear, other than soles and.....