Bare Act Search Results

Public Debt Act, 1944 Section 9

Title: Summary Procedure on Death of Holder of Government Securities Not Exceeding Five Thousand Rupees Face Value

State: Central

Year: 1944

Notwithstanding anything contained in section 7, if within six months of the death of a person who was the holder of a Government security or securities the face value of which does not in the aggregate exceed five thousand rupees, probate of his will or letters of administra­tion of his estate or a succession certificate issued under Part X of the Indian Succession Act, 1925, is not produced to the Bank, or proof to the satisfaction of the Bank that procedings have been instituted to obtain one of these is not furnished, the Bank may determine who is the person entitled to the security or securities, or to administer the estate of the deceased and may make an order vesting the security or securities in the person so determined.

Howrah Municipal Corporation Act, 1980 Complete Act

State: West Bengal

Year: 1980

.....milk-shop or other place (a) from which milk is supplied on or for sale, or (b) in which milk is kept for purposes of sale or used for manufacture or preparation for sale of (i) butter, or (ii) ghee, or (iii) cheese, or (iv) curd, or (v) dried, sterilized, condensed or tonned milk, but does not include (a) a shop or other place in which milk is sold for consumption on the premises only, or (b) a shop or other place from which milk is sold or supplied in hermetically closed and unopened receptacles in the same original condition in which it was first received in such shop or other place; 55. Clauses (7A) and (7B) ins. by W. B. Act 29 of 1990. (7B) "dairyman" includes any occupier of a dairy, any cow-keeper who trades in milk, or any wholesale or retail seller of milk; (8) "dangerous disease" means (a) cholera, plague, small-pox, cerebrospinal meningitis, diphtheria, tuberculosis, leprosy and syphilis, and (b) any other epidemic, endemic, or infectious disease which the State Government may, by notification, declare to be a dangerous disease for the purposes of this Act; 66. Clauses (8A) and (8B) ins. by W. B. Act 29 of 1990. (8A) "depot" means a place where articles.....

Central Excise Tariff Act, 1985 Chapter 39

Title: Plastics and Articles Thereof

State: Central

Year: 1985

.....(headings 3901 to 3914). 8. For the purposes of heading 3917, the expression "tubes, pipes and hoses" means hollow products, whether semi-manufactures or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-fiat tubing. However, except for the last-mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed 1.5 times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes. 9. For the purposes of heading 3918, the expression "wall or ceiling coverings of plastics" applies to products in rolls, of a width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated. 10. In headings 3920 and 3921, the expression "plates, sheets, film, foil and strip" applies only to plates, sheets, film,.....

Central Excise Tariff (Amendment) Act, 2004 Chapter XXXIX

Title: Plastics and Articles Thereof

State: Central

Year: 2004

.....(headings 3901 to 3914). 8. For the purposes of heading 3917, the expression "tubes, pipes and hoses" means hollow products, whether semi-manufactures or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-flat tubing. However, except for the last-mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed 1.5 times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes. 9. For the purposes of heading 3918, the expression "wall or ceiling coverings of plastics" applies to products in rolls, of a width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated. 10. In headings 3920 and 3921, the expression "plates, sheets, film, foil and strip" applies only to plates, sheets, film,.....

Customs Tariff Act 1975 Chapter 39

Title: Plastics and Articles Thereof

State: Central

Year: 1975

.....(headings 3901 to 3914). 8. For the purposes of heading 3917, the expression "tubes, pipes and hoses" means hollow products, whether semi-manufactures or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-flat tubing. However, except for the last-mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed 1.5. times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes, and hoses but as profile shapes. 9. For the purposes of heading 3918, the expression "wall or ceiling coverings of plastics" applies to products in rolls, of a width not less than 45 cms, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated. 10. In headings 3920 and 3921, the expression "plates, sheets, film, foil and strip" applies only to plates, sheets,.....

Customs Tariff (Amendment) Act, 2003 Chapter XXXIX

Title: Plastics and Articles Thereof

State: Central

Year: 2003

.....(headings 3901 to 3914). 8. For the purposes of heading 3917, the expression "tubes, pipes and hoses" means hollow products, whether semi-manufactures or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-flat tubing. However, except for the last-mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed 1.5 times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes. 9. For the purposes of heading 3918, the expression "wall or ceiling coverings of plastics" applies to products in rolls, of a width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated. 10. In headings 3920 and 3921, the expression "plates, sheets, film foil and strip" applies only to plates, sheets, film,.....

Central Excise Tariff Act, 1985 Chapter 72

Title: Iron and Steel

State: Central

Year: 1985

.....Chapter, the process of drawing or redrawing a bar, rod, wire rod, round bar or any other similar article, into bright bar, shall amount to "manufacture".] 1. In this Chapter, the following expressions have the meanings hereby assigned to them: (a) lloy pig iron: Pig iron containing, by weight, one or more of the following elements in the specified proportions: - more than 0.2% of chromium - more than 0.3% of copper - more than 0.3% of nickel - more than 0.1% of any of the following elements: aluminium, molybdenum, titanium, tungsten (wolfram), vanadium. (b) Non-alloy free-cutting steel: Non-alloy steel containing, by weight, one or more of the following elements in the specified proportions: - 0.08% or more of sulphur - 0.1% or more of lead - more than 0.05% of selenium - more than 0.01% of tellurium - more than 0.05% of bismuth. (c) Silicon-electrical steel: Alloy steels containing, by weight, at least 0.6% but not more than 6% of silicon and not more than 0.08% of carbon. They may also contain by weight not more than 1% of aluminium but no other element in a proportion that would give the steel the characteristics of another alloy steel. .....

Central Excise Tariff (Amendment) Act, 2004 Chapter LXXII

Title: Iron and Steel

State: Central

Year: 2004

.....must each exceed 10% by weight. 3. In relation to flat-rolled products of this Chapter, the process of hardening or tempering shall amount to 'manufacture'. SUPPLEMENTARY NOTE Skelp means hot-rolled narrow strip of width not exceeding 600 mm with rolled (square, slightly round or bevelled) edge. Tariff Item Description of goods Unit Rate of duty (1) (2) (3) (4) I.--PRIMARYMATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM 7201 PIG IRON AND SPIEGELEISEN IN PIGS, BLOCKS OR OTHER PRIMARY FORMS 7201 10 00 - Non-alloy pig iron containing by weight 0.5% or less of phosphorus kg. 16% 7201 20 00 - Non-alloy pig iron containing by weight more than 0.5% of phosphorus kg. 16% 7201 50 - Alloy pig iron; spiegeleisen: 7201 50 10 -- Cast iron kg. 16% 7201 50 90 -- Other kg. 16% 7202 FERRO- ALLOYS - Ferro-manganese: 7202 11 00 - Containing by weight more than 2% of carbon kg. 16% 7202 19 00 -.....

The Pondicherry General Sales Tax Act, 1967 Complete Act

State: Pondicherry

Year: 1967

.....(g) re-lettered as clause (e) by Act 13 of 1971, section 2, with effect from 23-7-1971. (f) "business" includes - (i) any trade, commerce or manufacture or any adventure or concern in the nature of trade, commerce, or manufacture, whether or not such trade, commerce, manufacture, adventure or concern is carried on with a motive to make gain or profit and whether or not any profit accrues from such trade, commerce, manufacture, adventure or concern; and (ii) any transaction in connection with, or incidental or ancillary to, such trade, commerce, manufacture, adventure or concern; The original clauses (e) and (f) were respectively re-lettered as clauses (f) and (g) and the original clause (g) re-lettered as ˜clause' (e) by Act 13 of 1971, section 2, with effect from 23-7-1971. (g) "casual trader" means a person who has, whether as principal, agent, or in any other capacity, occasional transactions of a business nature involving the buying, selling supplying or distributing of goods in the Union territory, whether for cash, or for deferred payment, or for commission, remuneration or other valuable consideration and who does not reside or has no fixed place of business.....

Asansol Municipal Corporation Act, 1990 Complete Act

State: West Bengal

Year: 1990

.....milk shop or other place (a) from which milk is supplied on or for sale, or (b) in which milk is kept for purposes of sale or used for manufacture or preparation for sale of (i) butter, or (ii) ghee, or (iii) cheese, or (iv) curds, or (v) dried, sterilized, condensed or toned milk, but does not include (a) a shop or other place in which milk is sold for consumption on the premises only, or (b) a shop or other place from which milk is sold or supplied in hermetically closed and unopened receptacles in the same original condition in which it was first received in such shop or other place; (11) "dairyman" includes any occupier of a dairy, any cow-keeper who trades in milk, or any wholesale or retail seller of milk; (12) "dangerous disease" means (a) cholera, plague, chicken-pox, tuberculosis, leprosy, enteric fever, cerebrospinal meningitis and diphtheria; and (b) any other epidemic, endemic or infectious disease which the Chief Executive Officer may, by notification, declare to be a dangerous disease for the purposes of this Act; (13) "Depot" means a place where articles are stored, whether for sale or for any other purpose but not for domestic consumption or use, in.....