Bare Act Search Results

Chemical Weapons Convention Act, 2000 Schedule I

Title: Schedule

State: Central

Year: 2000

..... (d) Law enforcement including domestic riot control purposes. 10. "Production Capacity" means: The annual quantitative potential for manufacturing a specific chemical based on the technological process actually used or, if the process is not yet operational, planned to be used at the relevant facility. It shall be deemed to be equal to the nameplate capacity or, if the nameplate capacity is not available, to the design capacity. The nameplate capacity is the product output under conditions optimized for maximum quantity for the production facility, as demonstrated by one or more test-runs. The design capacity is the corresponding theoretically calculated product output. 11. "Organization" means: The Organization for the Prohibition of Chemical Weapons established pursuant to Article VIII of this Convention. 12. For the purposes of Article VI: (a) "Production" of a chemical means its formation through chemical reaction; (b) "Processing" of a chemical means a physical process, such as formulation, extraction and purification, in which a chemical is not converted into another chemical; (c) "Consumption" of a chemical means its conversion into another chemical.....

Finance Act, 2008 Complete Act

State: Central

Year: 2008

..... SECTION 62: Financial arrangements avoidance: Schedule 22 contains provision about avoidance involving financial arrangements. SECTION 63: Manufactured payments: (1) Schedule 23 contains anti-avoidance provisions about manufactured payments. (2) The amendments made by that Schedule have effect in relation to manufactured payments (including deemed manufactured payments) made (or treated as made) on or after 31 January 2008. SECTION 64: Controlled foreign companies: (2) In section 747 (imputation of chargeable profits of controlled foreign companies)- (1) Chapter 4 of Part 17 of ICTA (controlled foreign companies) is amended as follows. (a) in subsection (6), before "and" at the end of paragraph (a) insert- "(aa) any reference in this Chapter to its chargeable profits for an accounting period includes (subject to subsections (7) to (9)) income which accrues during that accounting period to the trustees of a settlement in relation to which the company is a settlor or a beneficiary;", and (b) after that subsection insert- "(7) Where there is more than one settlor or beneficiary in relation to the settlement mentioned in subsection (6)(aa), the income is to be.....

The Delhi Tax on Luxuries (Amendment) Act, 2012 Complete Act

State: Delhi

Year: 2012

.....convention, banquets, party, meeting, or exhibition-cum-sale and such other hall as may be specified by the Commissioner, irrespective of the fact whether on regular or periodical or occasional basis;"; (ii) for clause (b), the following clause shall be substituted, namely:- "(b) "business" includes activity of providing any luxury and any other service in connection with, or incidental or ancillary thereto for monetary consideration;"; (iii) for clause (e), the following clause shall be substituted, namely:- "(e) "concessional rate" in relation to a luxury provided in a hotel, means a rate lower than the normal rate fixed for such luxury by the proprietor or lower than that fixed by any Government, authority or under law for the time being in force;"; (iv) after clause (e), the following clauses stall be inserted, namely:- "(ea) "customer" means a banquet hall or a gymnasium/health corporate availing any luxury : (eb) "establishment" means a banquet hall or a gymnasium/health club or a hotel or a spa where luxury is provided to a customer by way of business;"; (v) after clause (f), the following clause shall be inserted namely:- "(fa) "gymnasium or.....

Central Excise Tariff Act, 1985 Chapter 39

Title: Plastics and Articles Thereof

State: Central

Year: 1985

.....(headings 3901 to 3914). 8. For the purposes of heading 3917, the expression "tubes, pipes and hoses" means hollow products, whether semi-manufactures or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-fiat tubing. However, except for the last-mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed 1.5 times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes. 9. For the purposes of heading 3918, the expression "wall or ceiling coverings of plastics" applies to products in rolls, of a width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated. 10. In headings 3920 and 3921, the expression "plates, sheets, film, foil and strip" applies only to plates, sheets, film,.....

Central Excise Tariff Act, 1985 Chapter 44

Title: Wood and Articles of Wood, Wood Charcoal

State: Central

Year: 1985

.....STAKES OF WOOD, POINTED BUT NOT SAWN LENGTHWISE; WOODEN STICKS, ROUGHLY TRIMMED BUT NOT TURNED, BENT OR OTHERWISE WORKED, SUITABLE FOR THE MANUFACTURE OF WALKING STICKS, UMBRELLAS, TOOL HANDLES OR THE LIKE; CHIPWOOD AND THE LIKE 4404 10 00 - Coniferous kg. 16% 4404 20 - Non-coniferous : 4404 20 10 --- Wooden sticks, roughly trimmed but not turned, bent or otherwise worked, suitable for the manufacture of walking sticks, tool handles, split poles, piles, pickets, stakes and the like kg. 16% 4404 20 20 --- Drawn Wood kg. 16% 4404 20 90 --- Other kg. 16% 4405 00 00 WOOD WOOL; WOOD FLOUR kg. Nil 4406 RAILWAY OR TRAMWAY SLEEPERS (CROSSTIES) OF WOOD 4406 10 00 - Not impregnated m3 16% 4406 90 00 - Other m3 16% 4407 WOOD SAWN OR CHIPPED LENGTHWISE, SLICED.....

Central Excise Tariff Act, 1985 Chapter 76

Title: Aluminium and Articles Thereof

State: Central

Year: 1985

.....been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. (b) Profiles Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. (c) Wire Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "fiattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or.....

Central Excise Tariff (Amendment) Act, 2004 Chapter XXXIX

Title: Plastics and Articles Thereof

State: Central

Year: 2004

.....(headings 3901 to 3914). 8. For the purposes of heading 3917, the expression "tubes, pipes and hoses" means hollow products, whether semi-manufactures or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-flat tubing. However, except for the last-mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed 1.5 times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes. 9. For the purposes of heading 3918, the expression "wall or ceiling coverings of plastics" applies to products in rolls, of a width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated. 10. In headings 3920 and 3921, the expression "plates, sheets, film, foil and strip" applies only to plates, sheets, film,.....

Central Excise Tariff (Amendment) Act, 2004 Chapter XLIV

Title: Wood and Articles of Wood, Wood Charcoal

State: Central

Year: 2004

.....WOOD, POINTED BUT NOT SAWN LENGTHWISE; WOODEN STICKS, ROUGHLY TRIMMED BUT NOT TURNED, BENT OR OTHERWISE WORKED, SUITABLE FOR THE MANUFACTURE OF WALKING STICKS, UMBRELLAS, TOOL HANDLES OR THE LIKE; CHIPWOOD AND THE LIKE 4404 10 00 - Coniferous kg. 16% 4404 20 - Non-coniferous: 4404 20 10 --- Wooden sticks, roughly trimmed but not kg. 16% turned, bent or otherwise worked, suitable for the manufacture of walking sticks, tool handles, split poles, piles, pickets, stakes and the like 4404 20 20 --- Drawn Wood kg. 16% 4404 20 90 --- Other kg. 16% 4405 00 00 WOOD WOOL; WOOD FLOUR kg. Nil 4406 RAILWAY OR TRAMWAY SLEEPERS (CROSSTIES) OF WOOD 4406 10 00 - Not impregnated m3 16% 4406 90 00 - Other m3 16% 4407 WOOD SAWN OR CHIPPED LENGTHWISE, SLICED OR PEELED, WHETHER OR NOT PLANED, SANDED OR END-JOINTED, OF A THICKNESS EXCEEDING 6 MM 4407 10 - Coniferous: 4407 10 10 .....

Central Excise Tariff (Amendment) Act, 2004 Chapter LXXIII

Title: Articles of Iron or Steel

State: Central

Year: 2004

.....exceeds 16 mm. 3. In relation to pipes and tubes of headings 7304, 7305 and 7306, the process of drawing or redrawing shall amount to 'manufacture'. 4. In relation to products of this Chapter, the process of galvanization shall amount to 'manufacture'. 5. In relation to the pipes and tubes of headings 7304 and 7305, the process of coating with cement or polyethylene or other plastic materials shall amount to 'manufacture'. Tariff Item Description of goods Unit Rate of duty (1) (2) (3) (4) 7301 SHEET PILING OF IRON OR STEEL, WHETHER OR NOT DRILLED, PUNCHED OR MADE FROM ASSEMBLED ELEMENTS; WELDED ANGLES, SHAPES AND SECTIONS, OF IRON OR STEEL 7301 10 00 Sheet piling kg. 16% 7301 20 Angles, shapes and sections: 7301 20 10 Steel slotted angles kg. 16% 7301 20 90 Other kg. 16% 7302 RAILWAY OR TRAMWAY TRACK CONSTRUCTION MATERIAL OF IRON OR STEEL, THE FOLLOWING: RAILS, CHECK-RAILS AND RACK RAILS, SWITCH BLADES, CROSSING FROGS, POINT RODS AND OTHER CROSSING PIECES,.....

Central Excise Tariff (Amendment) Act, 2004 Chapter LXXVI

Title: Aluminium and Articles Thereof

State: Central

Year: 2004

.....been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. (b) Profiles Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. (c) Wire Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or.....