Bare Act Search Results

Indira Gandhi National Open University Act, 1985 Complete Act

State: Central

Year: 1985

.....in the Gazette of India. SECTION 30: CONDITIONS OF SERVICE OF EMPLOYEES (1) Every employee of the University shall be appointed-under a written contract and such contract shall not be inconsistent with .the provisions of this Act, the Statutes and the Ordinances. (2) The contract referred to in sub-section (1) shall be lodged with the University and a copy of which shall be furnished to the employee concerned. SECTION 31: TRIBUNAL OF ARBITRATION (1) Any dispute arising out of a contract of employment referred to in S. 30 between the University and an employee shall, at the request of either party, be referred to a Tribunal of Arbitration which shall consist of one member nominated by the Board of Management, one member nominated by the employee concerned and an umpire to be nominated by the Visitor. (2) Every such reference shall be deemed to be a submission to arbitration upon the terms of this section within the meaning of the Arbitration Act, 1940-, and all the provisions of that Act, with the exception of S. 2 thereof, shall apply accordingly. (3) The procedure for regulating the work of the Tribunal of Arbitration shall be prescribed by the Statutes. (4) The decision of the.....

Indira Gandhi National Open University Act, 1985 Schedule II

Title: Second Schedule

State: Central

Year: 1985

.....of the two Schemes set out in Appendices A and B and he shall have for the purpose of these schemes the benefit of the service rendered under contract, if the retirement benefits under the contract terms are paid back by him to the University. 6(a) Transfer of employees from Central Government, Central University or Autonomous Bodies of Central Government. Where an employee of Central Government Central University/Autonomous Body of Central Government including a statutory body is permanently absorbed in the University, such of the past services rendered by him as would have counted for retirement benefits in that Government Organisation shall count for retirement benefits payable by the University subject to the following: (a) The transfer is with the consent of the parent Government/Organisation and is in public interest. (b) The employee has not opted to receive pro-rata retirement benefits from the parent Government/Organisation. (c) The Central Government/Autonomous Bodies of Central Government including a statutory body, discharges its pension liability, paying in lump sum, by a one time payment, the pro-rata pension service gratuity/terminal gratuity and.....

The [1][Mahatma Gandhi] University Act, 1985 Complete Act

State: Kerala

Year: 1985

THE [1][MAHATMA GANDHI] UNIVERSITY ACT, 1985 THE [1][MAHATMA GANDHI] UNIVERSITY ACT, 1985 (ACT 12 OF 1985) An Act to establish and incorporate a University at Kottayam by the name [2] [Mahatma Gandhi] University . Preamble."WHEREAS it is considered necessary to establish a new teaching and affiliating University in the State to provide for the urgent development of higher education in the areas comprised in the Kottayam, Ernakulam and Idukki revenue districts, the Kuttanad taluk of the Alleppey revenue district and the Kozhencherry, Mallappally, Thiruvalla and Ranni taluks of the Pathanamthitta revenue district of the State; BE it enacted in the Thirty-sixth Year of the Republic of India as follows:- CHAPTER I PRELIMINARY 1. Short title and commencement."(1) This Act may be called the [3] [Mahatma Gandhi University Act] 1985. (2). It shall be deemed to have come into force on the 2nd day of October, 1983. 2. Definitions."In this Act, unless the context otherwise requires,-- (1). "Academic council" means the Academic Council of the University; (2). "affiliated college" means college affiliated to the University in accordance with the provisions of this Act.....

Standards of Weights and Measures Enforcement Act, 1985 (54 of 1985) Section 14

Title: Verification, Stamping and Custody of Secondary or Working Standards

State: Central

Year: 1985

.....any secondary standard or working standard is stamped under sub-section (1), a certificate shall be separately issued showing the date on which such weight or measure was stamped. (3) Every verification and stamping referred to in sub-section (1) shall be made by such person or authority as may be specified by or under the Standards Act. (4) A secondary standard or working standard which is not verified and stamped in accordance with the provisions of sub-section (1) and sub-section (3) shall not be deemed to be a secondary standard or working standard, as the case may be, and shall not be used for the verification of any working standard or, as the case may be, for the verification of any weight or measure. (5) Every verified secondary standard and every verified working standard shall be kept at such place and in such custody as may be prescribed.

Standards of Weights and Measures Enforcement Act, 1985 (54 of 1985) Section 15

Title: Secondary or Working Standard Which May Not Be Stamped

State: Central

Year: 1985

(1) Where the State Government is of opinion that by reason of the size or nature of any secondary standard or working standard, it is not desirable or practicable to put a stamp thereon, it may direct that instead of putting a stamp on such secondary standard or working standard, a certificate may be issued to the effect that such secondary standard or working standard conforms to the standards established by or under the Standards Act and every secondary standard or working standard so certified shall be deemed to have been duly stamped under this Act on the date on which such certificate was issued. (2) Every certificate referred to in sub-section (1) shall be in such form as may be prescribed and shall contain such details as to enable a clear identification of the weight or measure to which it relates.

Standards of Weights and Measures Enforcement Act, 1985 (54 of 1985) Section 13

Title: Preparation of Secondary and Working Standards

State: Central

Year: 1985

The State Government may cause to be prepared at the metrological wing of the mint at Bombay, as many sets of secondary standards or working standards as it may think necessary: Provided that where the mint intimates the State Government in writing that it is unable to prepare any secondary standard or working standard, that Government may cause such secondary standard or working standard to be prepared by such organisation as the Central Government may, on a reference made to it by the State Government, by notification, specify in this behalf.

Central Excise Tariff Act, 1985 Chapter 97

Title: Works of Art, Collectors Pieces and Antiques (Blank)

State: Central

Year: 1985

SECTION XXI CHAPTER 97 WORKS OF ART, COLLECTORS PIECES AND ANTIQUES (BLANK)

Railway Protection Force (Amendment) Act, 1985 Section 13

Title: Insertion of New Section 15a

State: Central

Year: 1985

After section 15 of the principal Act, the following section shall be inserted, namely:- "15A. (1) No number of the Force shall, without the previous sanction in writing of the Central Government or of the prescribed authority,- (a) be a member of, or be associated in any way with, any trade union, labour union, political association or with any class of trade union, labour unions or political associations; or (b) be a member of, or be associated in any way with, any other society, institution, association or organisation that is not recognised as part of the Force or is not of a purely social, recreational or religious nature; or (c) communicate with the press or publish or cause to be published any book letter or other document except where such communication or publication is in the bone fide discharge of his duties or is of a purely literary, atrictic or scientific character or is of a prescribed nature. Explanation.- If any question arises as to whether any society, institution, association or organisation is of a purely social, recreational or religious nature under clause (b) of this sub-section, the decision of the Central Government thereon shall be final. .....

Central Excise Tariff Act, 1985 Chapter 72

Title: Iron and Steel

State: Central

Year: 1985

.....or other deformations produced during the rolling process (reinforcing bars and rods); - be twisted after rolling. (n) Angles, shapes and sections: Products having a uniform solid cross-section along their whole length which do not conform to any of the definitions at (ij), (k), (l) or (m) above or to the definition of wire. Chapter 72 does not include products of heading 7301 or 7302. (o) Wire: Cold-formed products in coils, of any uniform solid cross-section along their whole length, which do not conform to the definition of fiat-rolled products. (p) Hollow drill bars and rods: Hollow bars and rods of any cross-section, suitable for drills, of which the greatest external dimension of the cross-section exceeds 15 mm but does not exceed 52 mm, and of which the greatest internal dimension does not exceed one half of the greatest external dimension. Hollow bars and rods of iron or steel not conforming to this definition are to be classified in heading 7304. 2. Ferrous metals clad with another ferrous metal are to be classified as products of the ferrous metal predominating by weight. 3. Iron or steel products obtained by electrolytic deposition, by.....

Central Excise Tariff Act, 1985 Chapter 84

Title: Nuclear Reactors, Boilers, Machinery and Mechanical Appliances; Parts Thereof

State: Central

Year: 1985

.....8429 59 00 -- Other u 16% 8430 OTHER MOVING, GRADING, LEVELLING, SCRAPING, EXCAVATING, TAMPING, COMPACTING, EXTRACTING OR BORING MACHINERY, FOR EARTH, MINERALS OR ORES; PILE-DRIVERS AND PILE-EXTRACTORS; SNOW-PLOUGHS AND SNOW-BLOWERS 8430 10 - Pile-drivers and pile-extractors: 8430 10 10 --- Pile-drivers u 16% 8430 10 20 --- Pile-extractors u 16% 8430 20 00 - Snow-ploughs and snow-blowers u 16% - Coal or rock cutters and tunneling machinery: 8430 31 -- Self-propelled: 8430 31 10 --- Coal cutters u 16% 8430 31 20 --- Tunneling machinery u 16% 8430 31 90 --- Other u 16% 8430 39 00 -- Other u 16% - Other boring or sinking machinery: 8430 41 -- Self-propelled: 8430 41 10 --- Tube well drilling and core.....