Section Text
1) Where in any factory any manufacturing process produces dust, gas, fume or vapour of such character and to such extent as to be likely to explode to ignition, all practicable measures shall be taken to prevent any such explosion by-
(a) effective enclosure of the plant or machinery used in the process;
(b) removal or prevention of the accumulation of such dust, gas, fume or vapour;
(c) exclusion or effective enclosure of all possible sources of ignition.
(2) Where in any factory the plant or machinery used in a process such as is referred to in subsection (1) is not so constructed as to withstand the probable pressure which such an explosion as aforesaid would produce, all practicable measures shall be taken to restrict the spread and effects of the explosion by the provisions in the plant or machinery of chokes, baffles, vents or other effective appliances.
(3) Where any part of the plant or machinery in a factory contains any explosive or inflammable gas or vapour under pressure greater than atmospheric pressure, that part shall not be opened except in accordance with the following provisions, namely:-
(a) before the fastening of any joint of any pipe connected with the part of the fastening of the cover of any opening into the part is loosened, any flow of the gas or vapour into the part of any such pipe shall be effectively stopped by a stop valve or other means;
(b) before any such fastening as aforesaid is removed, all practicable measures shall be taken to reduce the pressure of the gas or vapour in the part or pipe to atmospheric pressure;
(c) where any such fastening as aforesaid has been loosened or removed effective measures shall be taken to prevent any explosive or inflammable gas or vapour from entering the part of pipe until the fastening has been secured, or, as the case may be, securely replaced :
Provided that the provisions of this sub-section shall not apply in the case of plant or machinery installed in the open air.
(4) No plant, tank or vessel which contains or has contained any explosive or inflammable substance shall be subjected in any factory to any welding, brazing, soldering or cutting operation which involves the application of heat unless adequate measures have first been taken to remove such substance and any fumes arising there from or to render such substance and fumes non-explosive or non-inflammable, and no such substance shall be allowed to enter such plant, tank or vessel after any such operation until the metal has cooled sufficiently to prevent any risk of igniting the substance.
(5) The State Government may by rules exempt, subject to such conditions as may be prescribed, any factory or class or description of factories from compliance with all or any of the provisions of this section. SECTION 38 PRECAUTIONS IN CASE OF FIRE (1) In every factory, all practicable measures shall be taken to prevent outbreak of fire and its spread, both internally and externally, and to provide and maintain-
(a) safe means of escape for all persons in the event of a fire, and (b) the necessary equipment and facilities for extinguishing fire.
(2) Effective measures shall be taken to ensure that in every factory all the workers are familiar with the means of escape in. case of fire and have been adequately trained in the routine to be followed in such cases.
(3) The State Government may make rules, in respect of any factory or class or description of factories, requiring the measures to be adopted to give effect to the provisions of sub-sections (1) and (2).
(4) Notwithstanding anything contained in clause (a) of sub-section (1) or sub-section (2), if the Chief Inspector, having regard to the nature of the work carried on in any factory, the construction of such factory, special risk to life or safety, or any other circumstances, is of the opinion that the measures provided in the factory, whether as prescribed or not, for the purposes of clause (a) of sub-section (1) or sub-section (2), are inadequate, he may, by order in writing, require that such additional measures as he may consider reasonable and necessary, be provided in the factory before such date as is specified in the order.]