Tack - Page 1 - Bare Acts

Central Excise Tariff (Amendment) Act, 2004 Chapter LXXIII

Title: Articles of Iron or Steel

State: Central

Year: 2004

.....exceeds 16 mm. 3. In relation to pipes and tubes of headings 7304, 7305 and 7306, the process of drawing or redrawing shall amount to 'manufacture'. 4. In relation to products of this Chapter, the process of galvanization shall amount to 'manufacture'. 5. In relation to the pipes and tubes of headings 7304 and 7305, the process of coating with cement or polyethylene or other plastic materials shall amount to 'manufacture'. Tariff Item Description of goods Unit Rate of duty (1) (2) (3) (4) 7301 SHEET PILING OF IRON OR STEEL, WHETHER OR NOT DRILLED, PUNCHED OR MADE FROM ASSEMBLED ELEMENTS; WELDED ANGLES, SHAPES AND SECTIONS, OF IRON OR STEEL 7301 10 00 Sheet piling kg. 16% 7301 20 Angles, shapes and sections: 7301 20 10 Steel slotted angles kg. 16% 7301 20 90 Other kg. 16% 7302 RAILWAY OR TRAMWAY TRACK CONSTRUCTION MATERIAL OF IRON OR STEEL, THE FOLLOWING: RAILS, CHECK-RAILS AND RACK RAILS, SWITCH BLADES, CROSSING FROGS, POINT RODS AND OTHER CROSSING PIECES,.....

View Complete Act List Judgments citing this section

Customs Tariff Act 1975 Chapter 73

Title: Articles of Iron or Steel

State: Central

Year: 1975

.....composition of steel as defined in Note 1 (d) to Chapter 72. 2. In this Chapter the word "wire" means hot or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm. Tariff Item Description of goods Unit Rate of duty Std. Prefnl. Areas (1) (2) (3) (4) (5) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 7301 10 00 - Sheet piling kg. [10%]8 - 7301 20 - Angles, shapes and sections : 7301 20 10 --- Steel slotted angles kg. [10%]8 - 7301 20 90 --- Other kg. [10%]8 - 7302 Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail .....

View Complete Act List Judgments citing this section

Customs Tariff (Amendment) Act, 2003 Chapter LXXIII

Title: Articles of Iron or Steel

State: Central

Year: 2003

.....30% - 732620 - Articles of iron or steel wire : 73262010 --- Tyre bead wire rings intended for use in the manufacture of tyres for cycles and cycle-rickshaws kg. 30% 73262090 --- Other kg. 30% - 732690 - Other : 73269010 --- Belt lacing of steel kg. 30% - 73269020 --- Belt fasteners for machinery belts kg. 30% - 73269030 --- Drain covers, plates, and frames for sewages, water or similar system kg. 30% - 73269040 --- Enamelled iron ware kg. 30% - 73269050 --- Grinding media balls and cylpebs kg. 30% - 73269060 --- Manufactures of stainless steel kg. 30% - 73269070 --- Articles of clad metal kg. 30% - 73269080 --- Parts of ships, floating structure and vessels (excluding hull, propellers and paddle-wheels) kg. 30% - --- Other : 73269091 ---- Shanks kg. 30% - 73269099 ---- Other kg. 30% -

View Complete Act List Judgments citing this section

Central Excise Tariff Act, 1985 Chapter 73

Title: Articles of Iron or Steel

State: Central

Year: 1985

.....composition of steel as defined in Note 1(d) to Chapter 72. 2. In this Chapter, the word "wire" means hot or cold formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm. 3. In relation to pipes and tubes of headings 7304, 7305 and 7306, the process of drawing or redrawing shall amount to 'manufacture'. 4. In relation to products of this Chapter, the process of galvanization shall amount to 'manufacture'. 5. In relation to the pipes and tubes of headings 1 [7304, 7305 and 7306] the process of coating with cement or polyethylene or other plastic materials shall amount to 'manufacture'. Tariff Item Description of goods Unit Rate of duty (1) (2) (3) (4) 7301 SHEET PILING OF IRON OR STEEL, WHETHER OR NOT DRILLED, PUNCHED OR MADE FROM ASSEMBLED ELEMENTS; WELDED ANGLES, SHAPES AND SECTIONS, OF IRON OR STEEL 7301 10 00 - -SHEET P ILING KG. 16% 7301 20 - -Angles, shapes and sections : .....

View Complete Act List Judgments citing this section

Central Excise Tariff Act, 1985 Chapter 74

Title: Copper and Articles Thereof

State: Central

Year: 1985

.....brass castings covered by ISRI code word 'Ivory'; new brass clippings covered by ISRI code word 'Label'; yellow brass primer covered by ISRI code word 'Lark'; brass pipe covered by ISRI code word 'Melon'; yellow brass rod turnings covered by ISRI code word 'Night'; new yellow brass rod ends covered by ISRI code word 'Noble'; yellow brass turnings covered by ISRI code word 'Normad'; mixed unsweated auto radiators covered by ISRI code word 'Ocean'; admiralty brass condenser tubes covered by ISRI code word 'Pales'; aluminium brass condenser tubes covered by ISRI code word 'Pallu'; manganese bronze solids covered by ISRI code word 'Parch' 7404 00 29 ---- Other kg. 16% 7405 00 00 MASTER ALLOYS OF COPPER kg. 16% 7406 COPPER POWDERS AND FLAKES 7406 10 00 - Powders of non-lamellar structure kg. 16% 7406 20 00 - Powders of lamellar structure;fiakes kg. 16% 7407 COPPER BARS, RODS AND.....

View Complete Act List Judgments citing this section

Central Excise Tariff (Amendment) Act, 2004 Chapter LXXIV

Title: Copper and Articles Thereof

State: Central

Year: 2004

.....one-tenth of the width. In the case of heading 7414, however, the term "wire" applies only to products, whether or not in coils, of any cross-sectional shape, of which no cross-sectional dimension exceeds 6 mm. (g) Plates, sheets, strip and foil Flat-surfaced products (other than the unwrought products of heading 7403), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including "modified rectangles" of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are: (i) of a rectangular (including square) shape with a thickness not exceeding one-tenth of the width, (ii) of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings. Headings 7409 and 7410 apply, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other.....

View Complete Act List Judgments citing this section

Customs Tariff Act 1975 Chapter 74

Title: Copper and Articles Thereof

State: Central

Year: 1975

..... 7401 20 00 - Cement copper (precipitated copper) kg. 12.5%3 -" 3. Substituted By The Third Schedule of Finance Act, 2006 w.e.f. 18.04.2006. 4. Omitted by The Finance Act, 2006, w.e.f. 1.1.2007. Prior to omission, it read as under:- "7403 23 -- Copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver): 7403 23 10 --- Copper-nickel-zinc base alloys (cupro-nickel) kg. 12.5%3 - 7403 23 20 --- Copper-nickel-zinc base alloys (nickel silver) kg. 12.5%3 -" 5. Omitted by The Finance Act, 2006, w.e.f. 1.1.2007. Prior to omission, it read as under:- "7407 22 -- Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) : 7407 22 10 --- Hollow bars kg. 12.5%3 - 7407 22 20 --- Bars and rods kg. 12.5%3 -" 6. Omitted by The Finance Act, 2006, w.e.f. 1.1.2007. Prior to omission, it read as under:- "7414 Cloth (including endless bands), grill and netting, of copper wire; expanded metal of.....

View Complete Act List Judgments citing this section

Customs Tariff (Amendment) Act, 2003 Chapter LXXIV

Title: Copper and Articles Thereof

State: Central

Year: 2003

.....one-tenth of the width. In the case of heading 7414, however, the term "wire" applies only to products, whether or not in coils, of any cross-sectional shape, of which no cross-sectional dimension exceeds 6 mm. (g) Plates, sheets, strip and foil Flat-surfaced products (other than the unwrought products of heading 7403), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including "modified rectangles" of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are: (i) of a rectangular (including square) shape with a thickness not exceeding one-tenth of the width, (ii) of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings. Headings 7409 and 7410 apply, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other.....

View Complete Act List Judgments citing this section

Transfer of Property Act, 1882 Chapter IV

Title: Of Mortgages of Immovable Property and Charges

State: Central

Year: 1882

.....times, at his request and at his own cost, and on payment of the mortgagee's costs and expenses in this behalf, to inspect and make copies or abstracts of, or extracts from, documents of title relating to the mortgaged property which are in the custody or power of the mortgagee.] Section 61 - Right to redeem separately or simultaneously 1 [61. Right to redeem separately or simultaneously A mortgagor who has executed two ormore mortgages in favour of the same mortgagee shall, in the absence of acontract to the contrary, when the principal money of any two or more of themortgages has become due, be entitled to redeem any one such mortgageseparately, or any two or more of such mortgages together.] ________________________ 1. Substituted byAct 20 of 1929, section 24 for the original section. Section 62 - Right of usufructuary mortgagor to recover possession In the case of a usufructuary mortgage, the mortgagor has a right to recover possession of the property 1 [together with the mortgage-deed and all documents relating to the mortgaged property which are in the possession or power of the mortgagee], - (a) where the mortgagee is authorized to pay himself the.....

View Complete Act List Judgments citing this section

Transfer of Property Act, 1882 Complete Act

Title: Transfer of Property Act, 1882

State: Central

Year: 1882

.....incidents, rights, liabilities, etc. Section3 - Interpretation-clause Section4 - Enactments relating to contracts to be taken as part of Contract Act and supplemental to the Registration Act. ChapterII - OF TRANSFERS OF PROPERTY BY ACT OF PARTIES Section5 - Transfer of property defined Section6 - What may be transferred Section7 - Persons competent to transfer Section8 - Operation of transfer Section9 - Oral transfer Section10 - Condition restraining alienation Section11 - Restriction repugnant to interest created Section12 - Condition making interest determinable on insolvency or attempted alienation Section13 - Transfer for benefit of unborn person Section14 - Rule against perpetuity Section15 - Transfer to class some of whom come under sections 13 and 14 Section16 - Transfer to take effect on failure of prior interest Section17 - Direction for accumulation Section18 - Transfer in perpetuity for benefit of public Section19 - Vested interest Section20 - When unborn person acquires vested interest on transfer for his benefit Section21 - Contingent interest Section22 - Transfer to members of a class who attain a particular age Section23 - Transfer.....

List Judgments citing this section

Bare Act Search Results