Bare Act Search Results

Calcutta Tramways Act, 1880 Complete Act

State: West Bengal

Year: 1880

.....27 Grantees to be responsible for all damages The grantees shall be answerable for all accidents, damages and injuries happening through their act or default, or through the act or default of any person in their employment by reason or in consequence of any of their works or carriages, and shall save harmless the Corporation and their officers and servants from all damages and costs in respect of such accidents, damages and injuries. Section 28 Power for the Corporation and police to regulate traffic on roads Nothing in this Act shall limit the powers of the Corporation or the police to regulate the passage of any traffic along or across any road along or across which any tramways are laid down, and the Corporation or police may exercise their authority as well on as off the tramway, and with respect as well to the traffic of the grantees as to the traffic of other persons. The Corporation shall not be liable to pay to the grantees any compensation for loss of traffic occasioned by the reasonable exercise of such authority. Section 29 Reservation of power over roads Nothing in this Act shall be construed to prevent the Corporation, or the Oriental Gas Company Limited,.....

Tramways Act, 1886 Complete Act

State: Central

Year: 1886

.....and to regulate the working of tramways: It is hereby enacted as follows : CHAPTER 1 PRELIMINARY SECTION 01: SHORT TITLE AND COMMENCEMENT (1) This Act may be called THE INDIAN TRAMWAYS ACT, 1886; and (2) It shall come into force at once. SECTION 02: LOCAL EXTENT (1) It extends in the first instance to1[the whole of India except2[the territories which, immediately before the 1st November, 1956, were comprised in Part B States] and the territories which were on the 12th March, 1886, respectively], administered by the Governor of Fort Saint George in Council, the Governor of Bombay in Council and the Lieutenant Governor of Bengal. 3[(2) This Act may by notification in the Official Gazette be extended to the whole or any part of the said territories by the 4[State Government] concerned.] SECTION 03: DEFINITIONS In this Act, unless there is something repugnant in the subject or context,- (1) "Local authority" means a municipal committee, district board, body of port commissioners or other authority legally entitled to, or entrusted by5[the Central Government or any State Government] with, the control or management of a municipal or local fund: (2) "road" means the way of a road,.....

Central Excise Tariff Act, 1985 Chapter 73

Title: Articles of Iron or Steel

State: Central

Year: 1985

.....composition of steel as defined in Note 1(d) to Chapter 72. 2. In this Chapter, the word "wire" means hot or cold formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm. 3. In relation to pipes and tubes of headings 7304, 7305 and 7306, the process of drawing or redrawing shall amount to 'manufacture'. 4. In relation to products of this Chapter, the process of galvanization shall amount to 'manufacture'. 5. In relation to the pipes and tubes of headings 1 [7304, 7305 and 7306] the process of coating with cement or polyethylene or other plastic materials shall amount to 'manufacture'. Tariff Item Description of goods Unit Rate of duty (1) (2) (3) (4) 7301 SHEET PILING OF IRON OR STEEL, WHETHER OR NOT DRILLED, PUNCHED OR MADE FROM ASSEMBLED ELEMENTS; WELDED ANGLES, SHAPES AND SECTIONS, OF IRON OR STEEL 7301 10 00 - -SHEET P ILING KG. 16% 7301 20 - -Angles, shapes and sections : .....

Central Excise Tariff (Amendment) Act, 2004 Chapter LXXIII

Title: Articles of Iron or Steel

State: Central

Year: 2004

.....exceeds 16 mm. 3. In relation to pipes and tubes of headings 7304, 7305 and 7306, the process of drawing or redrawing shall amount to 'manufacture'. 4. In relation to products of this Chapter, the process of galvanization shall amount to 'manufacture'. 5. In relation to the pipes and tubes of headings 7304 and 7305, the process of coating with cement or polyethylene or other plastic materials shall amount to 'manufacture'. Tariff Item Description of goods Unit Rate of duty (1) (2) (3) (4) 7301 SHEET PILING OF IRON OR STEEL, WHETHER OR NOT DRILLED, PUNCHED OR MADE FROM ASSEMBLED ELEMENTS; WELDED ANGLES, SHAPES AND SECTIONS, OF IRON OR STEEL 7301 10 00 Sheet piling kg. 16% 7301 20 Angles, shapes and sections: 7301 20 10 Steel slotted angles kg. 16% 7301 20 90 Other kg. 16% 7302 RAILWAY OR TRAMWAY TRACK CONSTRUCTION MATERIAL OF IRON OR STEEL, THE FOLLOWING: RAILS, CHECK-RAILS AND RACK RAILS, SWITCH BLADES, CROSSING FROGS, POINT RODS AND OTHER CROSSING PIECES,.....

Customs Tariff Act 1975 Chapter 73

Title: Articles of Iron or Steel

State: Central

Year: 1975

.....composition of steel as defined in Note 1 (d) to Chapter 72. 2. In this Chapter the word "wire" means hot or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm. Tariff Item Description of goods Unit Rate of duty Std. Prefnl. Areas (1) (2) (3) (4) (5) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 7301 10 00 - Sheet piling kg. [10%]8 - 7301 20 - Angles, shapes and sections : 7301 20 10 --- Steel slotted angles kg. [10%]8 - 7301 20 90 --- Other kg. [10%]8 - 7302 Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail .....

Customs Tariff (Amendment) Act, 2003 Chapter LXXIII

Title: Articles of Iron or Steel

State: Central

Year: 2003

.....30% - 732620 - Articles of iron or steel wire : 73262010 --- Tyre bead wire rings intended for use in the manufacture of tyres for cycles and cycle-rickshaws kg. 30% 73262090 --- Other kg. 30% - 732690 - Other : 73269010 --- Belt lacing of steel kg. 30% - 73269020 --- Belt fasteners for machinery belts kg. 30% - 73269030 --- Drain covers, plates, and frames for sewages, water or similar system kg. 30% - 73269040 --- Enamelled iron ware kg. 30% - 73269050 --- Grinding media balls and cylpebs kg. 30% - 73269060 --- Manufactures of stainless steel kg. 30% - 73269070 --- Articles of clad metal kg. 30% - 73269080 --- Parts of ships, floating structure and vessels (excluding hull, propellers and paddle-wheels) kg. 30% - --- Other : 73269091 ---- Shanks kg. 30% - 73269099 ---- Other kg. 30% -

Central Excise Tariff Act, 1985 Chapter 39

Title: Plastics and Articles Thereof

State: Central

Year: 1985

..... 16% 3914 00 90 --- ---Other kg. 16% II. -WASTE, PARINGS AND SCRAP; SEMI- MANUFACTURES; ARTICLES 3915 WASTE, PARINGS AND SCRAP, OF PLASTICS 3915 10 00 - -Of polymers of ethylene kg. 16% 3915 20 00 - -Of polymers of styrene kg. 16% 3915 30 - -Of polymers of vinyl chloride: 3915 30 10 --- ---Of copolymers of vinyl chloride kg. 16% 3915 30 90 --- ---Other kg. 16% 3915 90 - -Of other plastics : 3915 90 10 --- ---Of polypropylene kg. 16% --- ---Of polymers of vinyl acetate : 3915 90 21 ---- ---Of copolymers of vinyl acetate kg. 16% 3915 90 29 ---- Other Kg. 16% 3915 90 30 --- Of acrylic polymers and.....

Central Excise Tariff (Amendment) Act, 2004 Chapter XXXIX

Title: Plastics and Articles Thereof

State: Central

Year: 2004

.....(headings 3901 to 3914). 8. For the purposes of heading 3917, the expression "tubes, pipes and hoses" means hollow products, whether semi-manufactures or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-flat tubing. However, except for the last-mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed 1.5 times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes. 9. For the purposes of heading 3918, the expression "wall or ceiling coverings of plastics" applies to products in rolls, of a width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated. 10. In headings 3920 and 3921, the expression "plates, sheets, film, foil and strip" applies only to plates, sheets, film,.....

Central Excise Tariff (Amendment) Act, 2004 Chapter XL

Title: Rubber and Articles Thereof

State: Central

Year: 2004

.....products, whether or not vulcanised or hard: natural rubber, balata, gutta-percha, guayule, chicle and similar natural gums, synthetic rubber, factice derived from oils, and such substances reclaimed. 2. This Chapter does not cover: (a) goods of Section XI (textiles and textile articles); (b) footwear or parts thereof of Chapter 64; (c) headgear or parts thereof (including bathing caps) of Chapter 65; (d) mechanical or electrical appliances or parts thereof of Section XVI (including electrical goods of all kinds), of hard rubber; (e) articles of Chapter 90,92,94 or 96; or (f) articles of Chapter 95 (other than sports gloves, mittens and mitts and articles of headings 4011 to 4013). 3. In headings 4001 to 4003 and 4005, the expression "primary forms" applies only to the following forms: (a) liquids and pastes (including latex, whether or not pre-vulcanised, and other dispersions and solutions); (b) blocks of irregular shape, lumps, bales, powders, granules, crumbs and similar bulk forms. 4. In Note 1 to this Chapter and in heading 4002, the expression "synthetic rubber" applies to: (a) unsaturated synthetic substances which can be irreversibly.....

Central Excise Tariff (Amendment) Act, 2004 Chapter LXXIV

Title: Copper and Articles Thereof

State: Central

Year: 2004

.....one-tenth of the width. In the case of heading 7414, however, the term "wire" applies only to products, whether or not in coils, of any cross-sectional shape, of which no cross-sectional dimension exceeds 6 mm. (g) Plates, sheets, strip and foil Flat-surfaced products (other than the unwrought products of heading 7403), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including "modified rectangles" of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are: (i) of a rectangular (including square) shape with a thickness not exceeding one-tenth of the width, (ii) of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings. Headings 7409 and 7410 apply, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other.....