Bare Act Search Results

Shillong Rifile Range and Umlong Cantonments Assimilation of Laws Act, 1954 Schedule 1

Title: Schedule I

State: Central

Year: 1954

THESCHEDULE [Seesection 2(c)] (1)The Shillong (Rifle Range) Cantonment, that is to say, the area as definedbelow:-- Note1:-- This area lies about half a mile to the west of Laban village, andabout the same distance south of the Umjasai river as it runs from West to eastfrom Cantonment Boundary Pillar No.37. Itis nowhere continuos with the boundaries of the Shillong Cantonment. Note2:--No.I Boundary Pillar is situated at a bearing of 313 and at a distance of420 feet from the centre of the 400 firing point on the main range through whichthe Ummawlong stream flows and at a bearing of 243 and at a distance of 565 feetfrom centre of the 600 firing point on the same range Magneticvariation when this boundary was surveyed in 1926 was O.15' west. Boundariesof the detached area Pillars Bearing from Magnetic North Direct Horizontal distance in feet. Degrees Minutes Pillar No.1 to Pillar No.2 The boundary runs from pillar No 1.a north - westerly direction crossing the head of a Nala, to pillar No.2, which is situated on spur across this Nala. 308 18 335 Pillar No.2 to.....

Shillong (Rifle Range and Umlong) Cantonments Assimilation of Laws Act, 1954 Complete Act

State: Central

Year: 1954

.....date appointed under sub-section (2) of section 1-for the coming into force of this Act; (b) "law" means so much of any Act, Ordinance, Regulation, rule, order or byelaw as relates to any of the matters enumerated in Lists I and III in the Seventh Schedule to the Constitution; (c) "scheduled areas" means the areas specified in the Schedule. SECTION 03: ASSIMILATION OF LAWS (1) All laws which immediately before the appointed day extend to or are in force in, the scheduled areas shall on that day cease to be in force in the scheduled areas except as respects things done or omitted to be done before that day, and for the removal of doubts, it is hereby declared that section 6 of the General Clauses Act, 1897-shall apply in relation to such cesser as it applies in relation to the repeal of an enactment by a Central Act. (2) All laws which immediately before the appointed day extend to, or are in force in, the Khasi and Jaintia Hills District shall as from that day extend to and be in force in the scheduled areas. SECTION 04: REMOVAL OF DIFFICULTIES If any difficulty arises in relation to the transition under section 3-from one law or group of laws to another law or group.....

Central Excise Tariff Act, 1985 Chapter 73

Title: Articles of Iron or Steel

State: Central

Year: 1985

.....composition of steel as defined in Note 1(d) to Chapter 72. 2. In this Chapter, the word "wire" means hot or cold formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm. 3. In relation to pipes and tubes of headings 7304, 7305 and 7306, the process of drawing or redrawing shall amount to 'manufacture'. 4. In relation to products of this Chapter, the process of galvanization shall amount to 'manufacture'. 5. In relation to the pipes and tubes of headings 1 [7304, 7305 and 7306] the process of coating with cement or polyethylene or other plastic materials shall amount to 'manufacture'. Tariff Item Description of goods Unit Rate of duty (1) (2) (3) (4) 7301 SHEET PILING OF IRON OR STEEL, WHETHER OR NOT DRILLED, PUNCHED OR MADE FROM ASSEMBLED ELEMENTS; WELDED ANGLES, SHAPES AND SECTIONS, OF IRON OR STEEL 7301 10 00 - -SHEET P ILING KG. 16% 7301 20 - -Angles, shapes and sections : .....

Central Excise Tariff (Amendment) Act, 2004 Chapter LXXIII

Title: Articles of Iron or Steel

State: Central

Year: 2004

.....exceeds 16 mm. 3. In relation to pipes and tubes of headings 7304, 7305 and 7306, the process of drawing or redrawing shall amount to 'manufacture'. 4. In relation to products of this Chapter, the process of galvanization shall amount to 'manufacture'. 5. In relation to the pipes and tubes of headings 7304 and 7305, the process of coating with cement or polyethylene or other plastic materials shall amount to 'manufacture'. Tariff Item Description of goods Unit Rate of duty (1) (2) (3) (4) 7301 SHEET PILING OF IRON OR STEEL, WHETHER OR NOT DRILLED, PUNCHED OR MADE FROM ASSEMBLED ELEMENTS; WELDED ANGLES, SHAPES AND SECTIONS, OF IRON OR STEEL 7301 10 00 Sheet piling kg. 16% 7301 20 Angles, shapes and sections: 7301 20 10 Steel slotted angles kg. 16% 7301 20 90 Other kg. 16% 7302 RAILWAY OR TRAMWAY TRACK CONSTRUCTION MATERIAL OF IRON OR STEEL, THE FOLLOWING: RAILS, CHECK-RAILS AND RACK RAILS, SWITCH BLADES, CROSSING FROGS, POINT RODS AND OTHER CROSSING PIECES,.....

Customs Tariff Act 1975 Chapter 73

Title: Articles of Iron or Steel

State: Central

Year: 1975

.....composition of steel as defined in Note 1 (d) to Chapter 72. 2. In this Chapter the word "wire" means hot or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm. Tariff Item Description of goods Unit Rate of duty Std. Prefnl. Areas (1) (2) (3) (4) (5) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 7301 10 00 - Sheet piling kg. [10%]8 - 7301 20 - Angles, shapes and sections : 7301 20 10 --- Steel slotted angles kg. [10%]8 - 7301 20 90 --- Other kg. [10%]8 - 7302 Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail .....

Bengal Municipal Act, 1932 Complete Act

State: West Bengal

Year: 1932

.....sanction of the Governor General has been obtained under sub-section (3) of section 80A of the Government of .India Act to the passing of this Act; It is hereby enacted as follows CHAPTER 1 PRELIMINARY Section 1 Short title, extent and commencement (1)This Act may be called the Bengal Municipal Act, 1932. (2) It extends to the whole of [West Bengal], except Calcutta as defined fay clause (11) of section 3 of the Calcutta Municipal Act, 1923. (3) It shall come into force on such date as the (State Government] may, by notification, appoint. (4) Notwithstanding anything contained in sub-section (2), it shall not take effect in any cantonment or part of a cantonment without the consent of the [Central Government] previously obtained. (5) Notwithstanding anything contained in sub-section (2), the provisions of this Act shall apply to the district of Darjeeling or any part thereof subject to such exceptions and modifications as the State Government may, by notification, direct. Section 2 Savings .- ********* All municipalities constituted, ****** limits defined, regulations, measurements and divisions made, licenses and notices issued, taxes, tolls, rates and fees.....

Kolkata Municipal Corporation Act, 1980 Complete Act

State: West Bengal

Year: 1980

..... (7) "building of the warehouse class" means a building, the whole or a substantial part of which is used, or intended to be used, as a warehouse, factory, manufactory, brewery, or distillery, or for any similar purpose, which is neither a "domestic building" nor a "public building" as defined in this section, and includes a hut used or intended to be used for any of the purposes mentioned in this clause; (8) "bustee" means an area containing land not less than seven hundred square metres in area occupied by or for the purposes of any collection of huts or other structures used or intended to be used for human habitation. Explanation.-If any question arises as to whether any particular area is or is not a bustee, the Corporation shall decide the question and its decision shall be final; (9) "Kolkata" means the area described in Schedule I; 3 Clause (10) omitted by s. 2 of the Calcutta Municipal Corporation (Amendment) Act, 1996 (West Ben. Act VI of 1996) (with retrospective effect from 4.12.1995), which was earlier as under: '(10) "candidate" in section 75 and in Schedule III means a person who has been nominated as a candidate at any election of a Councillor or who claims.....

Central Excise Tariff Act, 1985 Chapter 85

Title: Electrical Machinery and Equipment and Parts Thereof; Sound Recorders and Reproducers, Television Image and Sound Recorders and Reproducers, and Parts and Accessories of Such Articles

State: Central

Year: 1985

.....circuits may also include discrete components; (c) micro-assemblies of the moulded module, micromodule or similar types, consisting of discrete, active or both active and passive, components which are combined and interconnected. For the classification of the articles defined in this Note, headings 8541 and 8542 shall take precedence over any other heading in this Schedule which might cover them by reference to, in particular, their function. 6. Records, tapes and other media of heading 8523 or 8524 remain classified in those headings, when they are presented with the apparatus for which they are intended. This Note does not apply to such media when they are presented with articles other than the apparatus for which they are intended. 7. For the purposes of heading 8548, "spent primary cells, spent primary batteries and spent electric accumulators" are those which are neither usable as such because of breakage, cutting-up, wear or other reasons, nor capable of being recharged. 8. For the purposes of heading 8524 "recording" of sound or other phenomena shall amount to manufacture." 5. Substituted by the seventh schedule of Finance Act, 2006, w.e.f. 01.01.2007......

Central Excise Tariff (Amendment) Act, 2004 Chapter XLI

Title: Raw Hides and Skins (Other Than Furskins) and Leather

State: Central

Year: 2004

..... 4115 COMPOSITION LEATHER WITH A BASIS OF LEATHER OR LEATHER FIBER, IN SLABS, SHEETS OR STRIP, WHETHER OR NOT IN ROLLS; PARINGS AND OTHER WASTE OF LEATHER OR OF COMPOSITION LEATHER, NOT SUITABLE FOR THE MANUFACTURE OF LEATHER ARTICLES; LEATHER DUST, POWDER AND FLOUR 4115 10 00 - Composition leather with a basis of leather or leather fiber, in slabs, sheets or strip, whether or not in rolls kg. Nil 4115 20 - Parings and other waste of leather or of composition leather, not suitable for the manufacture of leather articles; leather dust, powder and flour: 4115 20 10 -- Cuttings of leather kg. Nil 4115 20 90 -- Other kg. Nil

Central Excise Tariff (Amendment) Act, 2004 Chapter LXXXV

Title: Electrical Machinery and Equipment and Parts Thereof; Sound Recorders and Reproducers, Television Image and Sound Recorders and Reproducers, and Parts and Accessories of Such Articles

State: Central

Year: 2004

.....circuits may also include discrete components; (c) micro-assemblies of the moulded module, micromodule or similar types, consisting of discrete, active or both active and passive, components which are combined and interconnected. For the classification of the articles defined in this Note, headings 8541 and 8542 shall take precedence over any other heading in this Schedule which might cover them by reference to, in particular, their function. 6. Records, tapes and other media of heading 8523 or 8524 remain classified in those headings, when they are presented with the apparatus for which they are intended. This Note does not apply to such media when they are presented with articles other than the apparatus for which they are intended. 7. For the purposes of heading 8548, "spent primary cells, spent primary batteries and spent electric accumulators" are those which are neither usable as such because of breakage, cutting-up, wear or other reasons, nor capable of being recharged. 8. For the purposes of heading 8524 "recording" of sound or other phenomena shall amount to manufacture. SUB-HEADING NOTES 1. Sub-headings 8519 92 and 8527 12 cover only cassette-players.....